Overview
Tinned copper wire consists of a high-purity copper core electroplated with a thin layer of tin, typically 1–5% of the total weight. This combination leverages copper’s excellent electrical conductivity (5.96×10⁷ S/m) while the tin layer prevents oxidation and improves solderability. It is commonly available in gauges ranging from 0.02 mm to 6 mm, with bare or enameled variants. The tin coating also mitigates fretting corrosion in high-vibration environments, making it ideal for aerospace and automotive applications. Its lifespan exceeds bare copper by 3–5 times in humid or saline conditions, per ASTM B33 standards.
Physical and Chemical Properties
The wire exhibits a tensile strength of 200–400 MPa, depending on tempering (soft, hard, or annealed). Tin’s low melting point (232°C) facilitates easy soldering without flux in some grades. The coating typically adheres at 2–10 µm thickness, tested via ISO 2177’s dissolution method. Chemically, the tin layer forms a passive oxide film (SnO₂) that resists sulfurization—a common issue in rubber-insulated cables. Its thermal conductivity (~65 W/m·K) is slightly lower than pure copper but remains superior to alternatives like aluminum.
Main Applications
Over 60% of tinned copper wire is used in power transmission (e.g., transformer windings) and PCB jumpers due to its self-fluxing property during wave soldering. Marine industries utilize it for boat wiring (ABYC standards) where saltwater corrosion is a concern. In telecommunications, it serves as shielding in RG-58 coaxial cables. Niche uses include jewelry making (for its anti-tarnish quality) and robotics (for flexible wiring harnesses). Automotive startups favor it for battery interconnects in EVs.
Safety and Storage
Though non-flammable, overheating during installation may emit tin oxide fumes—use NIOSH-approved respirators. Store in sealed moisture-barrier bags with desiccants to prevent ‘tin whisker’ growth, a crystalline defect that can cause short circuits. B2B buyers should request RoHS/REACH compliance certificates to ensure the absence of lead (historically used in tin alloys). For reels exceeding 50 kg, OSHA mandates palletized storage to prevent workplace injuries.
B2B Procurement Guide
Key specifications to confirm: tin coating thickness (measured via XRF), continuous service temperature (-60°C to +105°C standard), and elongation percentage (15–30% for most applications). For bulk orders (>1 ton), demand mill test reports validating conductivity (≥100% IACS). Spot-check deliveries for coating defects using a 10x magnifier—pinholes exceeding 5% coverage warrant rejection. Preferred suppliers include those offering custom stranding (e.g., 19/38 configurations) and UL 1015/1561 certifications.
Related Manufacturers
- 主营：接地线、zr-djyvp3、焊把线、声屏障铜导线、信号线、电焊机、缘电线、485总线、485电缆、计算机、直流线、syv电缆、bv电线10、mhyv煤矿、电缆mhyv、zr-djyp2vp2、ia-djyp3vp3、阻燃bv线、信号电缆、法兰桥架、电缆工业、电线电缆、专用电缆、连接器mc4、低温电缆、电线国标