Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

AUIRS2191S

Updated: 2026-07-15

Overview

The AUIRS2191S is a high-voltage, high-speed gate driver IC designed for driving MOSFETs and IGBTs in half-bridge configurations. It is widely used in industrial motor drives, solar inverters, and automotive power systems due to its reliability and advanced protection features. Manufactured by Infineon Technologies, this driver IC integrates critical functions such as under-voltage lockout (UVLO) and dead-time control, ensuring safe and efficient operation in demanding environments. Its compact design and high noise immunity make it suitable for space-constrained applications.

Structure and Working Principle

ADM6996MX-AD-T-1 电机驱动器及控制器 LANTIQ 封装QFP128 批次21+深圳市万联威科技有限公司

The AUIRS2191S consists of two independent gate drive channels, each capable of sourcing and sinking high peak currents to quickly switch power transistors. It operates with a floating design, allowing it to handle high-side switching in half-bridge topologies. The driver uses level-shift technology to transmit control signals from the low-voltage logic side to the high-voltage switch side. Internal dead-time control prevents shoot-through currents, while UVLO protection ensures the driver only operates when the supply voltage is within a safe range.

商家经验真实案例 · 安全可信
自动大灯感应器不灵敏
本文提供解决自动大灯感应器反应迟钝的实用方法,包括清洁感应器、检查灵敏度设置、排除环境干扰以及可能的硬件故障排查,帮助恢复大灯自动功能的正常使用。

Key Features

The AUIRS2191S offers several advanced features, including a wide operating voltage range (up to 600V) and high noise immunity, making it resilient in electrically noisy environments. Its dual outputs provide precise control over switching transitions, minimizing power losses. Additional features include matched propagation delays for both channels, which ensures balanced switching performance. The driver also includes a shutdown input for emergency cutoff, enhancing system safety in fault conditions.

Application Areas

This gate driver is commonly used in industrial motor control systems, where it drives IGBTs in variable frequency drives (VFDs) and servo controllers. Its robustness also makes it ideal for automotive applications, such as electric vehicle (EV) powertrains and onboard chargers. In renewable energy systems, the AUIRS2191S is employed in solar inverters and wind turbine converters. Its ability to handle high voltages and temperatures ensures reliable performance in these critical applications.

Maintenance and Precautions

NCV303LSN25T1G 电压检测可编程延迟 监控复位IC ON/安森美深圳市千科宇科技有限公司

To ensure long-term reliability, proper PCB layout is essential. Keep high-current paths short and use low-inductance connections to minimize voltage spikes. Adequate heat dissipation should also be considered, especially in high-frequency switching applications. Avoid exceeding the maximum ratings for voltage and current, as this can damage the driver. Always follow the manufacturer's guidelines for storage and handling to prevent electrostatic discharge (ESD) damage.

商家经验真实案例 · 安全可信
花样机y轴感应器故障
本文针对花样机Y轴感应器故障问题,从故障现象、定位方法到解决方案进行系统分析,提供清洁维护、信号检测及配件更换等实用建议,帮助快速恢复设备正常运行。

B2B Procurement Guide

When sourcing the AUIRS2191S, verify the supplier's authenticity to avoid counterfeit components. Reliable distributors like authorized Infineon partners or reputable electronics wholesalers are recommended. Consider bulk purchasing for cost savings, but ensure the components are stored in anti-static packaging. Lead times can vary, so plan orders in advance, especially for large-scale industrial projects.

Related Manufacturers