Aicaigou LogoB2B WikiIndustrial Encyclopedia

ATtiny412-SSF

Updated: 2026-08-03

Overview

The ATtiny412-SSF is part of Microchip's ATtiny series of 8-bit microcontrollers, optimized for cost-sensitive and space-constrained designs. Based on the AVR architecture, it integrates essential peripherals like timers, analog comparators, and serial interfaces. With a compact SOIC-8 package, it suits applications where board real estate is limited. Its low-power sleep modes (down to 100nA) make it ideal for battery-operated devices, while the 20MHz operating speed ensures responsive performance for basic control tasks.

Structure and Working Principle

W25Q128FVEAQ-TRAY 电子元器件 Winbond 封装SOIC-8 批次24+深圳市外芯人半导体有限公司

The microcontroller consists of a CPU core, non-volatile Flash memory for code storage, SRAM for runtime data, and EEPROM for parameter retention. It operates on a single-cycle RISC instruction set, enabling efficient execution. Peripherals include a 10-bit ADC, PWM channels, and hardware communication interfaces (UART, SPI, I2C). The device is programmed via UPDI (Unified Program and Debug Interface), simplifying development with modern toolchains like MPLAB X IDE.

商家经验真实案例 · 安全可信
tds2024c低频测量法
本文针对TDS2024C示波器测量低于1Hz信号的难题,提供三种实用解决方案:硬件改造提升灵敏度、软件算法优化波形捕获、环境干扰排除技巧,帮助工程师突破低频测量瓶颈。

Key Features

Energy efficiency is a standout trait, with Active mode consuming <100µA/MHz and Power-Down mode at 100nA. The wide voltage range (1.8V–5.5V) accommodates diverse power sources. Other features include a configurable custom logic (CCL) block for hardware-based state machines, a built-in temperature sensor, and robust noise immunity. The 4KB Flash memory supports over 10,000 write cycles, ensuring longevity for firmware updates.

Application Areas

Common uses include sensor nodes, smart buttons, and wearable devices due to its low-power profile. In industrial settings, it serves in motor control interfaces or simple PLCs. Consumer applications range from LED lighting control to USB peripheral controllers. Its small footprint also makes it suitable for space-critical designs like compact IoT gateways or embedded HMI systems.

Maintenance and Precautions

AD7870LNZ 模数转换器(ADC) Analog Devices Inc. 封装21+ 批次21+深圳市冠亿通科技有限公司

Avoid exposure to voltages beyond specified limits to prevent latch-up. Use proper decoupling capacitors (0.1µF recommended) near the VCC pin for stable operation. For firmware updates, ensure UPDI programming voltage matches the target's supply (3.3V typical). ESD precautions are critical during assembly; storage in anti-static bags is advised.

商家经验真实案例 · 安全可信
pq3225参数解析
本文深入解析pq3225的关键参数,包括其性能特点、适用场景及常见疑问解答,帮助用户全面了解该产品的技术规格与实际应用价值。

B2B Procurement Guide

Volume pricing is available for orders exceeding 1,000 units, with lead times typically 6–8 weeks. Verify authenticity by purchasing through authorized distributors like Digi-Key or Mouser. Evaluate alternative models (e.g., ATtiny414 with more pins) if scalability is needed. Development kits (e.g., ATtiny412 Xplained Nano) aid prototyping. Check for RoHS compliance if environmental regulations apply.

Related Manufacturers