Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

ATtiny15-20PU

Updated: 2026-08-06

Overview

The ATtiny15-20PU is an 8-bit microcontroller from Microchip Technology's AVR family, designed for compact and efficient embedded control applications. It integrates flash memory, EEPROM, and SRAM in a small 8-pin DIP package, making it suitable for space-constrained designs. With its 20 MHz maximum operating frequency and low power consumption, it's ideal for battery-powered devices and real-time control systems. The microcontroller features a RISC architecture with 120 powerful instructions, most executing in a single clock cycle. It includes analog comparators, timers, and PWM outputs, providing versatile functionality for various applications. The ATtiny15-20PU is particularly valued for its cost-effectiveness in mass production scenarios.

Structure and Working Principle

ATTINY15-20PU 电子元器件 ATMEL 封装SOP8 批次22+深圳市拓午电子科技有限公司

The ATtiny15-20PU's architecture centers around an 8-bit AVR CPU that processes instructions efficiently. The 1KB of in-system programmable flash memory stores the program code, while the 64 bytes of EEPROM allow for data storage that persists without power. The 32 bytes of SRAM provide temporary data storage during operation. The microcontroller operates on a von Neumann architecture where program and data share the same address space. It uses a two-stage pipeline to fetch and execute instructions simultaneously, enabling most instructions to complete in one clock cycle. The device includes multiple I/O pins that can be configured for various functions including digital input/output, analog input, and PWM output.

商家经验真实案例 · 安全可信
tdt24301z型号解析
本文深入解析tdt24301z这一型号的产品特性、应用场景及相关技术参数,帮助读者全面了解其功能与价值。

Key Features

The ATtiny15-20PU offers several notable features including a wide operating voltage range from 2.7V to 5.5V, making it compatible with various power supplies. Its low power consumption (typically 1.5mA at 5V, 4MHz in active mode) extends battery life in portable applications. The microcontroller includes an internal calibrated oscillator, eliminating the need for external clock components in many cases. Other key features include 32 general-purpose working registers, a 10-bit analog comparator, and four PWM channels. The device supports in-system programming through SPI interface, allowing for easy firmware updates. Its -40°C to +85°C operating temperature range makes it suitable for industrial environments.

Application Areas

The ATtiny15-20PU finds widespread use in consumer electronics such as remote controls, toys, and small appliances. Its small size and low power consumption make it ideal for these applications. In automotive systems, it's used for simple control functions like sensor interfaces and lighting controls. Industrial applications include sensor nodes, simple motor controls, and interface modules. The microcontroller is also popular in DIY electronics and educational projects due to its simplicity and low cost. Its analog comparator and PWM capabilities make it suitable for basic power control and measurement applications.

Maintenance and Precautions

74VHCT244MTC 电子元器件 FSC 封装SSOP 批次22+深圳市拓午电子科技有限公司

When working with the ATtiny15-20PU, proper ESD protection measures should always be followed as static electricity can damage the sensitive semiconductor components. The device should be stored in anti-static packaging when not in use. During soldering, temperature profiles should be carefully controlled to prevent thermal damage to the IC. For programming and debugging, ensure the correct voltage levels are used for communications. The microcontroller's flash memory has a limited number of write cycles (approximately 10,000), so firmware updates should be optimized to minimize unnecessary writes. Power supply decoupling capacitors should be placed close to the VCC and GND pins for stable operation.

商家经验真实案例 · 安全可信
e r50-6与h08mn2sia一样吗
本文解析e r50-6与h08mn2sia两种焊丝材料的异同,从成分特性、适用场景到焊接效果差异,帮助读者根据实际需求做出合理选择。

B2B Procurement Guide

When procuring ATtiny15-20PU microcontrollers in bulk, verify the supplier's authorization status with Microchip Technology to ensure genuine components. Consider lead times carefully, as semiconductor shortages may affect availability. Request samples for testing before large orders, especially when switching suppliers. Evaluate packaging options (tubes, trays, or tape-and-reel) based on your production requirements. For long-term projects, consider securing multi-year purchase agreements to lock in pricing. Check for RoHS compliance documentation if required for your markets. Some suppliers may offer programming services as an added value.

Related Manufacturers