Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

ATtiny13-PU

Updated: 2026-07-15

Overview

The ATtiny13-PU is a low-cost, low-power 8-bit microcontroller from Microchip's AVR family. It is designed for simple control applications, offering 1KB of Flash memory for program storage and 64B of SRAM for data handling. With 6 GPIO pins and a compact DIP-8 package, it is widely used in hobbyist projects, embedded systems, and lightweight automation. Its popularity stems from its ease of programming (via Arduino IDE or AVR toolchain) and minimal power requirements, making it suitable for battery-operated devices. Despite its limited resources, it supports features like PWM, ADC, and interrupts, enabling versatile use cases.

Structure and Working Principle

原装ATTINY13A-PU 单片机MCU MICROCHIP微芯 封装DIP8深圳市中芯巨能电子有限公司

The ATtiny13-PU is based on the AVR RISC architecture, executing most instructions in a single clock cycle. It includes a 1KB Flash memory for storing firmware, 64B SRAM for runtime data, and 64B EEPROM for non-volatile storage. The chip operates at 1.8-5.5V, with a clock speed of up to 20MHz. Its 6 GPIO pins can be configured as inputs or outputs, with some supporting analog-to-digital conversion (ADC) or pulse-width modulation (PWM). Internal peripherals include timers, comparators, and watchdog timers, enabling tasks like motor control or sensor interfacing without external components.

商家经验真实案例 · 安全可信
电容坏了判断方法
本文介绍三种实用的电容故障判断方法,包括外观检查、万用表测量和充放电测试,帮助快速识别电容是否损坏,避免设备故障。

Key Features

The ATtiny13-PU stands out for its minimalistic design and energy efficiency. It consumes less than 1µA in power-down mode, making it ideal for battery-powered devices. Its 8-bit architecture is optimized for simple control logic, and the 1KB Flash memory suffices for basic firmware. Notable features include a 10-bit ADC (4 channels), hardware PWM outputs, and internal oscillators (up to 9.6MHz). The DIP-8 package allows easy prototyping on breadboards, while its affordability (under $2 per unit) makes it a budget-friendly choice for small-scale projects.

Application Areas

The ATtiny13-PU is commonly used in DIY electronics, such as LED controllers, temperature sensors, and small robots. Its low power consumption suits wearable devices and IoT nodes, while its PWM and ADC capabilities enable motor control and analog signal processing. In industrial settings, it serves as a cost-effective solution for simple automation tasks, like button debouncing or relay control. Educational institutions also use it to teach microcontroller basics due to its simplicity and compatibility with open-source tools like Arduino.

Maintenance and Precautions

ATTINY13A-PU 集成电路(IC) SOPDIPQFP 兼容性好 工作温度深圳市深创盛科技有限公司

To ensure longevity, avoid exceeding the ATtiny13-PU's voltage range (1.8-5.5V) and use ESD protection during handling. Power supply decoupling capacitors (e.g., 100nF) are recommended to stabilize voltage. For firmware updates, follow proper ICSP (In-Circuit Serial Programming) protocols. Heat dissipation is rarely an issue due to its low power draw, but prolonged exposure to high temperatures (>85°C) should be avoided. Always verify pin configurations in datasheets to prevent short circuits or incorrect connections.

商家经验真实案例 · 安全可信
IGBT贴片
本文解析IGBT贴片的核心特性与应用场景,从结构设计到散热方案,揭秘这种功率半导体器件如何成为工业设备中的隐形心脏,并探讨选型时的关键考量因素。

B2B Procurement Guide

For bulk purchases, consider authorized distributors like Digi-Key or Mouser to ensure authenticity. Prices typically drop below $0.50 per unit for orders exceeding 1,000 pieces. Verify packaging (DIP-8 is standard) and lead times, especially during global chip shortages. Evaluate alternative models (e.g., ATtiny25 or ATtiny85) if projects require more memory or I/O pins. Request samples for testing compatibility before large-scale procurement. MOQs (Minimum Order Quantities) vary; some suppliers offer mixed batches with other AVR chips.

Related Manufacturers