Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

ATmega645-16AUR

Updated: 2026-08-06

Overview

The ATmega645-16AUR is a member of Microchip's AVR microcontroller family, renowned for its balance of performance, power efficiency, and cost-effectiveness. Based on an 8-bit RISC architecture, it is widely used in embedded systems where real-time control and data processing are critical. With 64KB of in-system programmable flash memory, 4KB of SRAM, and 2KB of EEPROM, it offers ample storage for firmware and data. The microcontroller operates at a maximum frequency of 16MHz, making it suitable for a broad range of applications from industrial automation to consumer electronics.

Structure and Working Principle

ATMEGA645-16AUR 电子元器件 MICROCHIP 封装TQFP-64 批次21+深圳市芯巴巴科技有限公司

The ATmega645-16AUR integrates a high-performance AVR CPU core with advanced peripherals, including multiple timers/counters, USART, SPI, and I2C interfaces. Its Harvard architecture separates program and data memory buses, enabling simultaneous access for improved throughput. The microcontroller executes most instructions in a single clock cycle, achieving up to 16 MIPS at 16MHz. It supports in-system programming (ISP) and debugWire for on-chip debugging, simplifying development and firmware updates. Power management features include multiple sleep modes, reducing energy consumption in battery-operated devices.

商家经验真实案例 · 安全可信
存储器的分类与作用
本文系统介绍存储器的分类、特点及其在不同场景中的作用,帮助读者理解各类存储器的适用场景和技术差异,为工业采购提供参考依据。

Key Features

Key features of the ATmega645-16AUR include its 64KB flash memory for code storage, 4KB SRAM for data handling, and 2KB EEPROM for non-volatile data retention. The device operates across a wide voltage range (2.7V to 5.5V), making it versatile for various power environments. Communication is facilitated through USART, SPI, and I2C interfaces, enabling seamless connectivity with sensors, displays, and other peripherals. The microcontroller also includes a 10-bit ADC, analog comparators, and PWM channels, supporting analog signal processing and control applications.

Application Areas

The ATmega645-16AUR is extensively used in industrial automation for controlling machinery, sensors, and actuators. Its reliability and performance make it a preferred choice for motor control, PLCs, and monitoring systems. In consumer electronics, it powers devices like smart home systems, wearable gadgets, and entertainment equipment. The microcontroller's low-power capabilities also suit battery-operated IoT devices, such as environmental sensors and wireless nodes, where energy efficiency is paramount.

Maintenance and Precautions

ATMEGA645-16AUR 电子元器件 64-TQFP  规格书 资料 PDF深圳市龙宏电子科技有限公司

Proper handling of the ATmega645-16AUR involves observing ESD precautions to prevent damage to sensitive components. Use anti-static mats and wrist straps during installation and maintenance. Ensure the supply voltage remains within the specified range (2.7V to 5.5V) to avoid malfunctions. Regularly update firmware to address potential bugs and enhance functionality. For long-term storage, keep the microcontroller in a dry, anti-static environment to prevent moisture and static damage.

商家经验真实案例 · 安全可信
PM传感器故障处理
本文详细介绍了PM传感器常见故障的排查与处理方法,包括初步检查、信号诊断和校准维护三个关键步骤,帮助用户快速恢复传感器正常功能。

B2B Procurement Guide

When procuring the ATmega645-16AUR in bulk, verify the supplier's authenticity to avoid counterfeit products. Reputable distributors like Microchip Direct or authorized resellers are recommended. Consider lead times and minimum order quantities (MOQs), as these can vary between suppliers. Bulk purchases typically offer cost savings, with prices ranging approximately $3-$8 per unit depending on volume. Ensure compatibility with your existing design and check for long-term availability to avoid future supply chain disruptions.

Related Manufacturers