Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

AT24CS01 Serial EEPROM

Updated: 2026-07-19

Overview

The AT24CS01 is a 1Kb (128 x 8) serial EEPROM manufactured by Microchip Technology. It operates via the I2C interface, supporting standard (100kHz) and fast (400kHz) modes. Designed for low-power applications, it features a wide voltage range (1.7V to 5.5V), making it suitable for battery-operated devices. With a compact package (e.g., 8-lead SOIC or TSSOP), the AT24CS01 is widely used in embedded systems, IoT sensors, and industrial controls. Its non-volatile memory ensures data retention even during power loss, with a typical endurance of 1 million write cycles.

Structure and Working Principle

AT24CS01-SSHM-T 电子元器件 MICROCHIP/微芯 封装SOIC 批号24+深圳市纳艾斯科技有限公司

The AT24CS01 consists of a memory array, I2C interface logic, and charge pump for write operations. Data is stored in 128-byte pages, with byte-level read/write capabilities. The I2C protocol enables communication with a host microcontroller using just two wires (SCL and SDA). During writes, an internal charge pump generates the higher voltage required for EEPROM programming. The device includes write protection pins (A0-A2) for hardware address configuration, allowing multiple EEPROMs on the same bus.

商家经验真实案例 · 安全可信
电子天平传感器类型解析
本文详细解析电子天平传感器的单点与双点设计差异,分析各自适用场景及性能特点,帮助用户根据实际需求选择合适的传感器类型。

Key Features

The AT24CS01 stands out for its low power consumption, with a standby current of 1µA (typical) and active current under 1mA. It supports industrial temperature ranges (-40°C to +85°C), ensuring reliability in harsh environments. Other features include a built-in unique 128-bit serial number for device identification, hardware write protection, and a 5ms max write cycle time. Its small footprint and RoHS compliance make it ideal for space-constrained and eco-conscious designs.

Application Areas

Common applications include storing calibration data in sensors, preserving user settings in consumer electronics, and logging operational parameters in industrial equipment. It is also used in medical devices, automotive subsystems, and smart meters. In IoT deployments, the AT24CS01 serves as a cost-effective memory solution for edge devices, often paired with microcontrollers like Arduino or ESP8266. Its unique serial number feature aids in anti-counterfeiting and asset tracking.

Maintenance and Precautions

AT24CS01-SSHM-B 微芯 SOIC-8 25+ 集成电路电子IC芯片现货深圳市平信微科电子有限公司

To ensure longevity, avoid exceeding the maximum write cycle count (1 million cycles per byte). Distribute writes across memory locations when possible. Always use ESD precautions during handling and assembly. Designers should ensure proper pull-up resistors on the I2C bus and adhere to voltage limits. For mission-critical applications, implement software redundancy or error-checking mechanisms to detect memory corruption.

商家经验真实案例 · 安全可信
正品台式电感器
本文探讨正品台式电感器的核心特性,包括其工作原理、鉴别方法及常见应用场景,帮助读者全面了解这一工业组件。

B2B Procurement Guide

When sourcing AT24CS01 chips, verify authenticity by purchasing from authorized distributors like Microchip Direct, Digi-Key, or Mouser. Bulk orders (1,000+ units) typically reduce costs by 20-30%. Key procurement considerations include package type (e.g., SOIC-8 for easy prototyping), operating temperature grade (industrial vs. commercial), and lead time (commonly 6-8 weeks for non-stock items). Request samples for testing compatibility before large-scale deployment.

Related Manufacturers