AT24C08C-MAHM-E

Overview

The AT24C08C-MAHM-E is an 8Kbit serial EEPROM memory chip manufactured by Microchip Technology. It operates via a two-wire I2C interface, making it suitable for embedded systems requiring compact, non-volatile data storage. This device is designed for low-power applications, with a standby current of just 1µA, and supports a wide voltage range (1.7V to 5.5V), enhancing its versatility across different platforms. Its robust design ensures high endurance (1 million write cycles) and data retention for up to 100 years, meeting the demands of automotive, industrial, and consumer electronics. The chip is available in an 8-lead TSSOP package, offering a space-efficient solution for PCB designs.

Structure and Working Principle

深圳市航天军工半导体有限公司

The AT24C08C-MAHM-E consists of a memory array organized into 1024 bytes, each accessible via a 7-bit address in the I2C protocol. Internally, it integrates charge pump circuitry to generate the high voltages required for write operations, eliminating the need for an external supply. The I2C interface supports standard (100kHz) and fast (400kHz) modes, enabling flexible integration with microcontrollers. During operation, the chip receives commands and data through the serial clock (SCL) and serial data (SDA) lines. Write operations are self-timed, with an internal write cycle completing within 5ms. The device also includes write protection features, such as a hardware write-protect pin (WP) to prevent accidental data modification.

商家经验真实案例 · 安全可信

150千瓦逆变器发电量

本文详细解答150千瓦逆变器的发电量问题，包括理论计算、实际发电影响因素以及提升发电效率的实用建议，帮助读者全面了解逆变器的发电性能。

Key Features

The AT24C08C-MAHM-E stands out for its ultra-low power consumption, making it ideal for battery-powered devices like IoT sensors and wearables. Its wide operating voltage range ensures compatibility with both 3.3V and 5V systems, reducing design complexity. The chip’s industrial temperature range (-40°C to +85°C) guarantees reliability in harsh environments. Additional features include a 64-byte page write buffer, allowing faster data throughput, and Schmitt trigger inputs for improved noise immunity. The device is fully compliant with AEC-Q100 automotive standards, making it a preferred choice for automotive telematics and infotainment systems.

Application Areas

This EEPROM is widely deployed in automotive systems for storing calibration data, VIN numbers, and event logs. In consumer electronics, it is used in smart TVs, set-top boxes, and printers to retain user settings. Industrial applications include PLCs, motor controllers, and instrumentation where reliable parameter storage is critical. The chip’s small footprint and low power consumption also make it suitable for portable medical devices, such as glucose meters and hearing aids. Its compliance with automotive standards ensures adoption in ADAS (Advanced Driver Assistance Systems) and EV battery management systems.

Maintenance and Precautions

深圳市腾运泰科技有限公司

To ensure longevity, avoid exposing the AT24C08C-MAHM-E to voltages beyond its specified range (1.7V–5.5V). Always use ESD precautions during handling and assembly. When designing the PCB, route I2C lines away from high-frequency signals to minimize noise interference. For firmware development, implement retry mechanisms for write operations, as the I2C bus may experience temporary faults. The write-protect pin (WP) should be tied to GND or VCC explicitly to avoid floating states. Regularly verify data integrity in mission-critical applications through checksums or redundancy.

商家经验真实案例 · 安全可信

PLC计数器通电状态解析

本文详细解析PLC计数器的通电状态工作原理，包括计数器的基本功能、通电后的默认状态以及如何通过编程控制计数器的接通与断开，帮助读者全面理解PLC计数器的使用。

B2B Procurement Guide

When sourcing the AT24C08C-MAHM-E, prioritize authorized distributors like Microchip Direct or franchised partners to avoid counterfeit products. Bulk purchases (reels of 2,500 units) typically offer cost savings of 15–20%. Confirm lead times early, as automotive-grade components may have longer cycles. Evaluate alternative part numbers (e.g., AT24C08D for higher speed) if project requirements evolve. Request samples for prototyping, and validate compatibility with your I2C bus timing. For automotive projects, ensure the supplier provides full traceability and AEC-Q100 documentation.