Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

AT24C01D

Updated: 2026-07-15

Overview

The AT24C01D is a 1Kbit (128x8) serial EEPROM memory device manufactured by Microchip Technology, designed for low-power embedded systems. As part of the AT24C series, it supports the I2C protocol with clock frequencies up to 400kHz, enabling efficient communication with microcontrollers. This EEPROM is commonly used for storing calibration data, device settings, or small datasets in applications ranging from industrial controls to consumer electronics. Its non-volatile nature ensures data retention for over 100 years, while the hardware write-protect pin adds security against accidental modifications.

Structure and Working Principle

AT24C01D-XHM-T 电子元器件 Microchip 封装TSSOP-8 批次23+深圳市华睿芯科技有限公司

The AT24C01D consists of a memory array organized as 128 bytes of 8 bits each, with an integrated I2C interface controller. Data transfers occur through the SDA (data) and SCL (clock) lines, following standard I2C protocols with device addressing (0x50-0x57 for 1Kbit devices). Internally, it uses floating-gate transistors to store charge, representing binary states. Write operations require a 5ms typical write cycle time, while reads are instantaneous. The device incorporates error-checking mechanisms and supports sequential read operations for efficient data retrieval.

商家经验真实案例 · 安全可信
宝石绿vs翡翠绿
本文从色彩学角度解析宝石绿与翡翠绿的区别,包括色相倾向、饱和度差异和应用场景,帮助读者清晰辨别这两种常见绿色调。

Key Features

The AT24C01D offers several technical advantages: a wide voltage range (1.7V to 5.5V) supports battery-powered applications, while its 1μA standby current minimizes power consumption. With 1 million write cycle endurance and built-in noise suppression, it delivers reliable performance in electrically noisy environments. Notably, it provides 16-byte page write capability for efficient data updates and includes a write-protect pin for hardware-level data protection. Available in 8-lead PDIP, SOIC, and TSSOP packages, it suits diverse PCB layouts. Industrial-grade variants operate across -40°C to +85°C temperature ranges.

Application Areas

This EEPROM is extensively used in automotive systems for storing odometer data and ECU parameters. Medical devices employ it for calibration constants and usage logs, while IoT sensors utilize it for configuration storage and event recording. In consumer electronics, it appears in smart home devices, wearables, and appliances for firmware settings. Industrial applications include PLCs, instrumentation, and robotics for parameter storage. Its small footprint makes it ideal for space-constrained designs across these sectors.

Maintenance and Precautions

AT24C01D-MAHM-T 微芯 UDFN-8 25+ 集成电路电子IC芯片现货深圳市平信微科电子有限公司

Proper handling involves standard ESD precautions during installation - use grounded workstations and wrist straps. Avoid exceeding maximum ratings (6.25V absolute max) and ensure clean power supply decoupling with 0.1μF capacitors near VCC pins. For firmware implementation, incorporate write-cycle counters or wear-leveling algorithms in high-update scenarios. In noisy environments, employ I2C bus filtering and proper PCB trace routing. Industrial applications should specify extended temperature-grade variants (-40°C to +85°C) for reliable operation.

商家经验真实案例 · 安全可信
长晶可以自留种吗
本文探讨了长晶自留种的可行性,分析了品种特性、种植技术及注意事项,为种植者提供实用建议,帮助判断是否适合自留种。

B2B Procurement Guide

When sourcing AT24C01D chips, verify authenticity through authorized distributors like Avnet or Arrow to avoid counterfeit components. Consider ordering reel packaging (2500 units) for automated assembly lines versus tube packaging for prototyping. Lead times typically range from 4-8 weeks; establish buffer stock for critical projects. Evaluate alternative packaging options (SOIC vs. TSSOP) based on your PCB assembly capabilities. For high-reliability applications, request factory traceability documentation and consider automotive-grade AEC-Q100 qualified variants.

Related Manufacturers