Aicaigou LogoB2B WikiIndustrial Encyclopedia

Asphalt Waterproof Coating

Updated: 2026-07-19

Overview

Asphalt waterproof coating is a bituminous material formulated for creating seamless waterproof membranes in construction. It consists primarily of asphalt (petroleum or coal tar-based) combined with modifiers like polymers, fillers, and solvents to enhance performance. Modern formulations often include SBS (styrene-butadiene-styrene) or APP (atactic polypropylene) modifiers to improve flexibility and temperature resistance. These coatings are classified as either cold-applied (ready-to-use emulsions) or hot-applied (requires heating before application).

Physical and Chemical Properties

醇糠醛型呋喃玻璃钢隔离层 水性树脂耐磨漆 乙烯基酯玻璃钢增强层二层 橡胶改性沥青防水涂料 环氧类玻璃鳞片防腐涂料山东鹏盛建筑材料有限公司

The coating exhibits excellent waterproofing properties due to asphalt's inherent hydrophobic nature. Key physical characteristics include high viscosity (800-3000 cP for cold-applied types), adhesion strength exceeding 0.5 MPa, and elongation at break of 300-800% for modified versions. Chemically, it resists water penetration, weak acids, and alkalis but may degrade under prolonged UV exposure unless protected. The drying time ranges from 2-24 hours depending on thickness (typically 1.5-3mm per layer) and environmental conditions.

商家经验真实案例 · 安全可信
蹲便离墙距离详解
本文解析蹲便器与墙面之间的合适距离,包括常见尺寸范围、安装考量因素以及实用建议,帮助读者在装修或改造卫生间时做出合理选择。

Main Applications

Primary use cases include waterproofing flat roofs in commercial buildings, where it forms a durable membrane that accommodates structural movement. In civil engineering, it protects below-grade structures like parking garages and subway tunnels from groundwater penetration. Specialized formulations serve niche applications: quick-drying types for repair works, fiber-reinforced versions for crack bridging, and aluminum-coated products for UV protection. In industrial settings, it prevents corrosion in chemical storage areas when combined with appropriate primers.

Safety and Storage

AMP沥青防水防腐涂料 A及B两类高聚物材料 环氧三防电子绝缘漆寿光冠晨建筑材料有限公司

Asphalt coatings are classified as flammable liquids (flash point 40-100°C) and require proper ventilation during application. Workers should wear nitrile gloves, goggles, and respirators when handling solvent-based formulations due to VOC emissions. Storage drums must be kept upright in shaded areas away from heat sources. Shelf life is typically 6-12 months unopened; expired product may show separation or skinning. Dispose of waste according to local regulations for petroleum-derived products.

商家经验真实案例 · 安全可信
HDPE与SBS卷材搭接技巧
本文解析HDPE与SBS两种防水卷材的搭接方法,通过实际案例说明材料特性差异对施工的影响,并提供兼容性处理的实用建议,帮助解决异种材料接缝难题。

B2B Procurement Guide

For bulk procurement, verify the product meets GB/T 23445 (China) or ASTM D1970 (international) standards. Key specifications to request include solid content (≥50% for quality coatings), low-temperature flexibility (-15°C to -25°C), and tensile strength (>1.0 MPa). Consider application method compatibility - some formulations require specialized spray equipment while others are brush-applied. For large projects, request manufacturer technical support for surface preparation guidance and warranty terms (typically 5-10 years for certified applicators).

Related Manufacturers