Overview
An anemothermometer integrates wind speed and temperature measurement capabilities into a single device, eliminating the need for separate instruments. Modern versions typically use ultrasonic sensors or rotating vane mechanisms for wind detection, paired with thermocouples or RTDs for temperature. Industrial models often include additional functions like humidity sensing, data logging, and wireless connectivity. These instruments are essential for environmental monitoring, HVAC system balancing, and safety compliance in sectors like construction, aviation, and agriculture. Portable handheld units dominate the market, but permanently installed versions are used for continuous monitoring in weather stations or manufacturing facilities.
Structure and Working Principle
The device consists of two primary components: an anemometer module and a thermometer module. Vane-type models use rotating cups or propellers whose rotational speed correlates with wind velocity, while ultrasonic models measure the time difference of sound waves traveling against/with the wind. The temperature sensor is usually housed in a radiation shield to minimize solar heating effects. Advanced units employ microprocessor-based signal processing to convert raw sensor data into calibrated readings displayed on LCD screens. Some professional models feature swivel heads for directional measurements or telescopic probes for hard-to-reach areas. Industrial variants may include NEMA-rated enclosures for harsh environments.
Key Features
High-end anemothermometers offer 0.1 m/s wind speed resolution and ±0.5°C temperature accuracy, with sampling rates up to 2Hz for real-time monitoring. Look for units with backlit displays for low-light conditions and waterproof designs (IP67 or higher) for field use. Data logging capacity varies from 100 to over 10,000 data points in professional models. Specialized features include Bluetooth/Wi-Fi connectivity for remote monitoring, USB/RS-232 interfaces for data export, and compatibility with third-party software for analysis. Some agricultural models calculate wind chill or dew point automatically, while industrial versions may include 4–20mA outputs for PLC integration.
Application Areas
In HVAC, technicians use anemothermometers to balance air distribution systems and verify ventilation performance. Wind turbine maintenance teams rely on them for nacelle condition monitoring, while construction sites employ them for crane operation safety checks during high winds. Meteorologists deploy rugged versions for field research. The maritime industry uses corrosion-resistant models for shipboard weather stations, and manufacturers install them near exhaust systems for environmental compliance monitoring. Emerging applications include drone-based atmospheric studies and smart building automation systems that adjust ventilation based on real-time readings.
Maintenance and Precautions
Regular calibration (annually for professional use) against reference instruments maintains accuracy. For vane-type models, clean bearings periodically and check for physical damage to rotating components. Ultrasonic sensors require lens cleaning to prevent dust accumulation that could interfere with measurements. Store devices in protective cases when not in use, and avoid exposing electronics to prolonged moisture. Temperature probes should be kept away from heat sources during storage. When measuring near rotating machinery, use extended probes to maintain safe distances. Always verify the device's operating temperature range before use in extreme conditions.
B2B Procurement Guide
For bulk purchases (10+ units), request OEM customization options like company branding or modified measurement ranges. Industrial buyers should prioritize models with MTBF (Mean Time Between Failures) ratings exceeding 50,000 hours. Verify supplier certifications (ISO 9001, CE marking) and request sample testing before large orders. Consider total cost of ownership including calibration services, spare parts availability (e.g., replacement vanes), and software licensing fees for advanced models. For international procurement, confirm compliance with regional standards like ATEX for explosive atmospheres or FCC for electromagnetic compatibility. Lead times for specialized models typically range 4–8 weeks.
Related Manufacturers
- 主营：流速流量仪、大气采样器、黑烟识别器、风速仪、气体、采样器、检测仪、林格曼黑度仪、数采仪、油气回收检测仪、生物安全柜、天平、土壤、β射线扬尘、测温仪、测距仪、辐照计、辐射仪、在线自动水质采样器、油烟检测仪、烟尘烟气分析仪、恒温恒湿称重系统、噪声计、粉尘仪、重金属多参数水质检测仪
- 主营：高斯计、热像仪、检测仪、风速仪、吸入泵、成像仪、测试仪、测氡仪、离子计、干燥剂、剂量计、残氧仪、干燥柱、滴定仪、采样泵、检漏仪、活度计、报警仪、流量计、浊度计、剂量仪、流量校准、剂量率仪、电导率仪、悬浮颗粒
- 主营：单人防护装备包、个人防护包、移动执法装备、qdf-6风速仪、移动执法包、水污染监测设备、红外夜视仪、热成像仪、便携式超声波明渠流量、油烟检测仪、VOC检测仪、恒流大气采样器、移动源执法设备、在用车尾气分析仪、不透光烟度计、车用氮氧化物分析仪、OBD检测仪、FID检测仪、便携式水质自动采样器、水质快检试剂包、多普勒流量计、转子流速仪、红外气体泄漏检测仪、紫外线强度仪
- 主营：试验装置、电阻测试仪、便携式录波仪、叶轮风速计、综合测试系统、直流高压发生器、励磁小电流测试仪、工频耐压试验装置、继电保护测试仪、电缆故障测试仪、局部放电巡检仪、局部放电测试仪、变频串联谐振、SF6综合测试仪、互感器综合测试仪、绝缘子测试仪、氧化物避雷器测试仪、检定装置、电能表校验仪、大电流发生器、冲击电压发生器、变压器综合测试台、变压器材质分析仪、绕组变形测试仪、直流电阻测试仪、回路电阻测试仪
- 主营：气体分析仪、日本理研、日本新宇宙、温度计、水质检测仪、英国离子、霍尼韦尔
- 主营：洁净室、卤素灯、led光源、无线风速温度计、照射模块、实体显微、混合光源、点灯设备、单元设备、高亮度led、光源模块、光源设备、固化装置、照明设备、金属卤化物、精密光度计、监视器设备、表面检查灯、二维色彩计、可变型光源、卤素检查灯、照明系统设备、镜面反射率计、便携型光度计、高照度手电筒、红外线加热器
- 主营：救生圈、消防泵、灭火机、风速温度计、安全帽、棉帐篷、防寒服、收纳包、折叠桌凳、防洪子堤、折叠桌椅、遥控扳手、智能平台、破拆工具、电缆接头、抽绳式沙袋、检修翼型卡、救灾铝合金、灭火单级泵、移动堵漏机、防汛挡水板、救灾竹板床、漏电检测仪、铝合金桌凳、导线更换器、夜间照明灯
- 主营：温度计、电力工具、消防设备
- 主营：MRM树脂阀门、Watty瓦蒂热电偶、CEMEDINE胶水、温度计、新热工业加热器、Nirei仁礼胶带、KAIJO超声波清洗、NIPPONMUKI、TACMINA计量泵、AMADA激光焊接机、SDG昭和鼓风机、TOKICO流量计、YOSHIKAWA、NIPPONGEAR、漏液传感器、TORAY东丽、SODICK沙迪克、ANLET安耐特、KOTOHIRA琴平、IKURATOOLS、ONOSOKKI小野、TOTAKU东拓、OSAKATAIYU、AND、SHOJI LOCK、TAKEX竹中
- 主营：浓度计、检测仪、角度计、温度计、膜厚计、密度计、退磁机、噪音计、气压计、数字ph计、雾化喷头、温湿度计、特斯拉计、负离子计、防水orp计、加速度计、气象仪器、热成像仪、倒角卡尺、数字示波器、数字万用表、漏水探知器、数字盐度计、振动测试仪、离子测试仪
- 主营：加油桶、背水桶、止水阀、温度计、防护服、救援泵、油链锯、喷水枪、收纳包、灭火泵、消防马甲、防火面罩、高压水炮、森林林服、灭火水管、消防水泵、自吸水泵、防护头盔、灭火拖把、消防拖把、灭火水枪、水带背包、消防挎包、抗砸头盔、高压灭火机、风水灭火机
- 主营：温度计、绝缘毯
- 主营：防护服、防电弧服、防电弧套、温度计、防静电服、防电弧大褂、电工保护服、阻燃工作服、防触电工作服、防触电工作套装、电工防护劳保服、双重隔热阻燃服
- 主营：民政救灾物资、水域救援物资、防汛抗洪物资、风速温度计、地震救援物资
- 主营：绝缘罩、防护罩、断路开关、温度计天气仪、电力遮蔽罩、电压互感器、高压保护罩、绝缘保护罩、绝缘遮蔽罩、高压遮蔽罩、高压线缆接头、隔离开关遮蔽罩、隔离开关透明罩