Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Aluminum Equal Angle

Updated: 2026-07-20

Overview

Aluminum alloy equal angle is a standardized L-shaped profile with equal-length legs, extruded from aluminum alloys like 6061 or 6063. Its balanced design offers uniform strength in both directions, making it a staple in construction and industrial projects. Commonly available in thicknesses of 1.5mm to 10mm and leg lengths of 20mm to 150mm, it is favored for its adaptability to cutting, drilling, and welding. The material's oxide layer provides inherent corrosion resistance, further enhanced by anodizing or powder coating.

Structure and Working Principle

. 角铝 L型铝合金铝 6063等边铝 不等边铝规格齐全厂家直供山东太航金属材料有限公司

The equal-angle design distributes mechanical stress evenly across its legs, preventing deformation under load. Its geometry allows for versatile mounting—flange-to-flange or edge-to-surface—using bolts, rivets, or welds. Aluminum's low density (2.7 g/cm³) reduces structural weight without compromising strength. The alloy's tempering (e.g., T5 or T6) enhances hardness and tensile strength, enabling use in load-bearing applications like conveyor frames or solar panel mounts.

商家经验真实案例 · 安全可信
kfr50gw18mea81u1铜管长度
本文解答kfr50gw18mea81u1空调标配铜管长度问题,分析铜管长度对安装的影响,并提供选购外接铜管的注意事项,帮助用户合理规划空调安装方案。

Key Features

Lightweight construction cuts transportation and installation costs, while non-magnetic properties suit electrical applications. The material resists UV degradation and weathering, outperforming steel in humid or coastal environments. Machinability is a standout trait: aluminum angles can be CNC-cut or hand-fabricated with minimal tool wear. Recyclability (nearly 100% reclaimable) aligns with sustainable construction practices, reducing lifecycle environmental impact.

Application Areas

In construction, it forms window frames, partition supports, and signage backings. Industrial uses include equipment guards, workbench edges, and conveyor system rails. DIY projects leverage its bendability for custom furniture or garden structures. The aerospace sector employs high-grade alloys (e.g., 7075) for lightweight airframe components. Marine applications benefit from saltwater resistance, seen in boat ladders and dock fittings.

Maintenance and Precautions

扬辰现货批发5083角铝 定制铝件CNC加工铝型材 等边合金角钢上海扬辰铝业有限公司

Routine cleaning with mild soap and water prevents dirt buildup. Avoid abrasive cleaners that damage protective coatings. Inspect annually for cracks or corrosion in high-stress areas. For outdoor installations, specify powder-coated or anodized finishes to prolong lifespan. Galvanic corrosion can occur when coupled with dissimilar metals like copper; use insulating gaskets if necessary.

商家经验真实案例 · 安全可信
大一匹铜管单双排解析
本文解析大一匹空调铜管的单排与双排设计特点,从散热效率、成本控制到适用场景,帮助读者理解不同排数的实际影响与选择建议。

B2B Procurement Guide

Bulk orders typically require a 10-20% volume discount. Verify mill test certificates for alloy composition and tempering compliance (e.g., ASTM B221 or EN 573-3). Lead times vary by supplier: stock items ship in 1-2 weeks, while custom extrusions may take 4-6 weeks. Consider local suppliers to minimize logistics costs for large quantities. Request samples to check surface finish consistency.

Related Manufacturers