Overview
Aging-resistant polypropylene (PP) is a modified thermoplastic engineered to withstand degradation from UV radiation, heat, and oxidative stress. It retains the inherent advantages of standard PP—lightweight, chemical resistance, and flexibility—while offering extended service life for outdoor or high-stress environments. The material achieves its durability through additives like hindered amine light stabilizers (HALS) or UV absorbers, which neutralize free radicals formed during exposure. This makes it a preferred choice for industries requiring long-term performance under harsh conditions.
Physical and Chemical Properties
Aging-resistant PP exhibits a balance of mechanical and thermal properties, including a tensile strength of 30–40 MPa and a Vicat softening point around 150°C. Its modified formulation reduces chain scission caused by UV photons, maintaining integrity over years of outdoor use. Chemically, it resists acids, alkalis, and polar solvents but may swell in non-polar hydrocarbons. The material’s low density (0.91 g/cm³) and moisture resistance contribute to its popularity in lightweight applications.
Main Applications
The automotive sector uses aging-resistant PP for bumpers, dashboards, and under-the-hood components, where heat and engine fluids accelerate degradation. In construction, it’s employed in roofing membranes, pipes, and outdoor furniture. Packaging applications include UV-stabilized films for agricultural mulch and food containers. The material’s recyclability (PP5) aligns with sustainability goals, though additives may complicate reprocessing.
Safety and Storage
While PP is generally safe, processing at high temperatures (e.g., injection molding) may release volatile organic compounds (VOCs). Adequate ventilation and PPE (e.g., respirators) are recommended. Storage should prioritize avoiding prolonged UV exposure even before fabrication. Pellets must be kept dry to prevent hydrolysis of stabilizers. Bulk containers should be sealed and stored below 30°C to preserve additive efficacy.
B2B Procurement Guide
Buyers should specify stabilization requirements (e.g., 5+ years outdoor durability) and request technical datasheets with accelerated aging test results (e.g., ASTM D4329). Custom formulations with carbon black or TiO2 may enhance performance but increase costs. Supplier audits should verify ISO 9001 certification and batch consistency. MOQs typically start at 1 ton, with prices dropping 10–20% for orders exceeding 10 tons.
Related Manufacturers
- 主营：[]
- 主营：POE弹性体、PA尼龙增韧剂、PBT/PET增韧剂、pp阻燃剂、pp流动剂、塑料抗氧剂、POE塑料原料、PP聚丙增韧剂
- 主营：塑料板材
- 主营：拉西环填料、泰勒花环、多面空心球填料、塑料孔板波纹填料、塑料鲍尔环、环保球填料、哈凯登球、空心浮球、空心球填料、不锈钢鲍尔环、陶瓷鲍尔环、陶瓷拉西环、海尔环、不锈钢矩鞍环、矩鞍环填料、异鞍环填料、阶梯环填料、八四内弧环填料、扁环填料、陶瓷波纹填料、轻瓷填料、全瓷填料、瓷塑填料、四氟鲍尔环、不锈钢拉西环
- 主营：聚乙烯管、PPH管配件、PP管配件、塑料管配件、FRPP管配件
- 主营：PP、ABS、PA66、TPU、TPV、PBT、PC、POM、PPO、PC/ABS
- 主营：pe板、双股焊条、全新料焊条、pp板、pp管、双股三角圆焊条
- 主营：PA66、POM、PA12、耐热PP、PP、ABS、PC、EVA、LDPE、PA6、PPS、PA、PET、HDPE、云天化POM、旭化成POM、宝理POM、韩国工程POM、台塑POM、奇美ABS、PP韩国SK、泰科纳POM、PC沙伯基础、德国拜耳PC、PC日本出光、杜邦POM
- 主营：聚丙烯塑料、ABS塑料、POM塑料、塑胶原料、塑胶颗粒
- 主营：eva胶水、速干胶、瞬间胶、粘塑料胶水、ABS塑料胶、耐高温密封胶、塑料快干胶、pp塑料胶水、pp胶粘剂、密封胶、pvc胶水、胶粘剂、快干胶、焊接ab胶、尼龙胶水、强力胶水、橡胶胶水、金属修补剂、金属焊接剂、复合胶、溶剂型胶水、电子胶、AB胶、环氧胶、阻燃黄胶
- 主营：LCP、尼龙原料、PPA、耐高温材料、聚丙烯、PC、PC/ABS、PPS、EVA、PP、POM、POE、PA6、PA66、TPU、PET、ABS、PA12、PBT、PPO、PPE、合金料、LDPE、万华化学、HDPE
- 主营：PE板、三相分离器、酸洗槽、pp板、pph板、加工:pp水箱、储罐、喷淋塔等
- 主营：PA6、POM、PC/ABS、塑料颗粒、日本宝理pps、PBT、Pom100p、Pom500p、Pom900p、M90-44、F20-03、ABS747、abs757、美国杜邦、德国巴斯夫、日本宝理pom、ASA、PMMA、PEEK、PCTG、PPA、PPSU、PVDF、POE、乐天PC-1100
- 主营：美国杜邦、PBT、德国巴斯夫、塑料原料、工程塑料、德国朗盛、PA66、PC+ABS、PET、韩国LG、日本旭化成、PC、尼龙PA、POM、PPO、PPS、奇美abs、PA6、TPU、POM100p、POM500p、pom900p、pc1100、pc/abs、日本宝理pom
- 主营：瓷球、陶粒滤料、铁碳填料、塑料填料、耐酸砖、陶瓷填料、金属填料、氨水过滤器
- 主营：pps、pc、PTFE
- 主营：EVA、PP、PC、PA6、PA66、POM聚甲醛、ABS、PPS、PE、PETG、PMMA、PBT
- 主营：塑胶原料、PE聚乙烯、EVA醋酸乙烯、PP聚丙烯、PBT工程塑料、工程塑料、基础塑料、PA尼龙6/66、PC聚碳酸酯、POM聚甲醛、ABS、电线电缆、聚苯硫醚、电器外壳、电动工具、家用电器、电气外壳、外壳颗粒、汽车部件、熔喷料、家电部件、电子电器外壳
- 主营：氧化铁颜料、铁粉、膨润土、聚丙烯纤维、珍珠岩、矿物纤维、木质纤维、硅酸铝纤维、海泡石纤维、云母粉