Aicaigou LogoB2B WikiIndustrial Encyclopedia

ADM1490EBRZ

Updated: 2026-07-15

Overview

The ADM1490EBRZ is a dual-channel RS-485/RS-422 transceiver developed by Analog Devices. It is designed to provide reliable data communication in industrial environments where electromagnetic interference (EMI) and harsh conditions are common. The device supports data rates up to 16 Mbps and operates over a supply voltage range of 3.0V to 5.5V, making it versatile for various applications. This transceiver is widely used in factory automation, process control, and telecommunications systems. Its robust design ensures long-term reliability, even in the presence of ground loops and high noise levels. The ADM1490EBRZ is available in a compact SOIC package, suitable for space-constrained designs.

Structure and Working Principle

ISO124P原装供应深圳市华芯源电子有限公司

The ADM1490EBRZ integrates two independent transceiver channels, each capable of full-duplex communication. Each channel consists of a driver and a receiver, with built-in fail-safe features to ensure the output remains in a known state when inputs are open or shorted. The device utilizes differential signaling to minimize noise susceptibility and enhance signal integrity. Internally, the ADM1490EBRZ includes thermal shutdown and short-circuit protection mechanisms to prevent damage under fault conditions. The transceiver's low-power design makes it suitable for battery-operated systems, while its high EMC immunity ensures reliable operation in electrically noisy environments.

商家经验真实案例 · 安全可信
max7408eua管脚功能
本文详细解析MAX7408EUA芯片的管脚功能,包括各管脚的定义、作用及典型应用场景,帮助工程师快速掌握该芯片的使用要点。

Key Features

The ADM1490EBRZ offers several key features that make it a preferred choice for industrial communication. These include a wide operating voltage range (3.0V to 5.5V), high data rates (up to 16 Mbps), and robust EMC performance. The device also features low power consumption, with a typical supply current of 1.5 mA per channel. Additional features include hot-swap capability, which allows the transceiver to be inserted or removed from a live system without causing data corruption. The ADM1490EBRZ also supports half-duplex and full-duplex communication modes, providing flexibility for different network configurations.

Application Areas

The ADM1490EBRZ is commonly used in industrial automation systems, such as programmable logic controllers (PLCs), motor drives, and sensor networks. Its high noise immunity makes it ideal for applications in manufacturing plants, where electrical noise from heavy machinery can interfere with communication signals. Other application areas include building automation, energy management systems, and telecommunications infrastructure. The transceiver's ability to operate over long cable lengths (up to 1200 meters) further extends its utility in distributed control systems and remote monitoring applications.

Maintenance and Precautions

AD7416ARZ 温度传感器 ADI(亚德诺)深圳有信半导体有限公司

To ensure optimal performance, the ADM1490EBRZ should be installed with proper grounding and shielding. Avoid routing communication cables near high-voltage lines or sources of EMI. Regular inspection of connectors and cables is recommended to prevent signal degradation due to wear or corrosion. In case of malfunction, check for common issues such as incorrect supply voltage, faulty cables, or improper termination. The device's thermal shutdown feature may activate under extreme conditions, in which case allowing it to cool before resuming operation is advised.

商家经验真实案例 · 安全可信
5070ti比5060性能高多少
本文详细比较5070ti与5060的性能差异,包括核心参数、实际应用表现和能效比分析,帮助读者清晰了解两款产品的性能差距。

B2B Procurement Guide

When procuring the ADM1490EBRZ, verify the supplier's authenticity to avoid counterfeit components. Reputable distributors such as Digi-Key, Mouser, and authorized Analog Devices partners are recommended. Bulk purchases typically offer cost savings, with prices ranging from approximately $2.50 to $4.00 per unit depending on quantity. Ensure compatibility with your system's voltage and data rate requirements. Technical support and datasheets are available from Analog Devices' website to assist with integration. Lead times may vary, so plan procurement accordingly to avoid project delays.

Related Manufacturers