Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

AD7812TR

Updated: 2026-07-18

Overview

The AD7812TR is a high-precision digital temperature sensor manufactured by Analog Devices, a leader in analog and mixed-signal ICs. This compact device integrates a temperature sensor with a 10-bit analog-to-digital converter (ADC) and serial interface, making it suitable for various temperature monitoring applications. With its small form factor and low power consumption, the AD7812TR is particularly useful in space-constrained and battery-powered systems. It offers accuracy of ±2°C over the full temperature range, with resolution down to 0.25°C, making it suitable for both industrial and consumer applications.

Structure and Working Principle

AD7812TR北京罗彻斯特电子科技有限公司

The AD7812TR consists of a bandgap temperature sensor core, a 10-bit successive approximation ADC, and digital interface circuitry. The sensor generates a voltage proportional to absolute temperature, which the ADC converts to a digital value. The device communicates via a simple serial interface compatible with SPI and MICROWIRE protocols. It operates from a single 2.7V to 5.5V power supply, consuming minimal current during conversion (typically 300μA) and entering low-power shutdown mode between measurements.

商家经验真实案例 · 安全可信
5060ti和3080性能差距
本文对比了5060ti和3080显卡在游戏帧率、渲染速度和能耗比三个维度的性能差异,通过实测数据解析两者定位差异,帮助用户根据需求合理选择。

Key Features

The AD7812TR stands out for its combination of precision and low power consumption. Its 10-bit resolution provides adequate accuracy for most monitoring applications, while the serial interface simplifies integration with microcontrollers. Additional features include a programmable alarm function that asserts when temperature exceeds user-defined limits. The device's wide operating range (-55°C to +125°C) makes it suitable for harsh environments. The small SOT-23 package enables space-efficient designs where board real estate is limited.

Application Areas

The AD7812TR finds use in diverse temperature monitoring applications across multiple industries. In industrial settings, it's employed for equipment monitoring, process control, and environmental sensing. Consumer electronics applications include computer thermal management, battery temperature monitoring in portable devices, and climate control systems. The medical field utilizes these sensors in diagnostic equipment and patient monitoring devices where reliable temperature measurement is critical.

Maintenance and Precautions

AS7812ADTR-G1 其它线性稳压控制器 DIODES  美台深圳市数联宏科技有限公司

Proper handling and installation are crucial for optimal performance of the AD7812TR. The device should be protected from excessive mechanical stress during assembly, and solder profiles should adhere to manufacturer specifications. For accurate measurements, thermal coupling to the measured environment should be optimized. In high-noise environments, proper PCB layout techniques including ground planes and decoupling capacitors near the power pins are recommended to maintain measurement integrity.

商家经验真实案例 · 安全可信
轮毂电机驱动原理
本文解析电动摩托车轮毂电机的工作原理,包括电磁转换、动力传输及控制系统的协同作用,帮助读者理解其高效节能的核心机制。

B2B Procurement Guide

When procuring AD7812TR sensors in bulk, consider working directly with authorized distributors or Analog Devices representatives for volume pricing. Minimum order quantities typically apply for the best pricing. Lead times can vary based on market demand, so forward planning is advised. Verify authenticity through authorized channels to avoid counterfeit components. For custom requirements, Analog Devices offers application engineering support to assist with integration challenges.

Related Manufacturers