Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

AD5242BR10

Updated: 2026-07-17

Overview

The AD5242BR10 is a 10kΩ digital potentiometer from Analog Devices, offering high precision and reliability for electronic systems requiring programmable resistance. As part of the AD524x series, it integrates non-volatile memory (EEPROM) to retain settings during power cycles, making it suitable for applications where calibration persistence is critical. This IC operates across a 2.7V to 5.5V range and communicates via I2C interface, enabling easy integration with microcontrollers. Its compact SOIC-14 package and industrial-grade temperature range (−40°C to +125°C) cater to demanding environments such as factory automation and test equipment.

Structure and Working Principle

AD5242BRUZ10-RL7 数字电位器 ADI 封装16-TSSOP 批次24+深圳市新思汇科技有限公司

The AD5242BR10 consists of a resistor ladder network with 256 tap points, controlled by an internal digital-to-analog converter (DAC). The wiper position is adjusted via I2C commands, effectively mimicking a mechanical potentiometer without moving parts. Non-volatile memory stores the wiper position, ensuring settings are retained after power loss. A low 35ppm/°C temperature coefficient minimizes resistance drift, while its rail-to-rail operation allows full-range signal conditioning. Internal registers support zero-scale/midscale preset modes for quick calibration.

商家经验真实案例 · 安全可信
罐装收发器应用解析
本文探讨罐装收发器在工业领域的应用场景、技术特点及选购注意事项,帮助读者全面了解这一设备的核心价值与使用要点。

Key Features

Precision is a hallmark of the AD5242BR10, with ±1% resistance tolerance and 1 LSB wiper resolution. The device supports both I2C and SPI interfaces (model-dependent), offering flexibility in system design. Additional features include power-on reset to predefined values, daisy-chain capability for multi-device control, and low standby current (<1µA). Its robust construction resists mechanical wear, unlike traditional potentiometers, ensuring long-term stability in vibration-prone environments.

Application Areas

Industrial automation systems leverage the AD5242BR10 for sensor calibration, programmable gain amplifiers, and process control adjustments. Its noise immunity and precision suit factory equipment where manual tuning is impractical. In consumer electronics, it enables volume control in audio systems and LCD panel calibration. Test and measurement devices use it for automated self-calibration routines, reducing maintenance downtime. Medical instruments benefit from its repeatability in sensitive signal conditioning circuits.

Maintenance and Precautions

AD5242BR10 电子元器件 ADI 封装SOP16 批次14+深圳市康飞半导体有限公司

While solid-state design eliminates mechanical wear, ESD protection is critical during handling. Use grounded workstations and anti-static packaging to prevent damage to the CMOS circuitry. Avoid exposing the device to voltages beyond its absolute maximum ratings (7V). For noisy environments, bypass capacitors (0.1µF) near the power pins are recommended. Long-term reliability is enhanced by operating within the specified −40°C to +125°C junction temperature range.

商家经验真实案例 · 安全可信
盐城监视器升降
本文探讨盐城地区监视器升降设备的关键特性,包括其应用场景、设计特点以及选购要点,为相关行业用户提供实用参考。

B2B Procurement Guide

When sourcing the AD5242BR10, verify supplier authenticity to avoid counterfeit ICs—authorized distributors like Arrow Electronics or Avnet provide traceability. Lead times typically range from 2-6 weeks for standard orders. Consider ordering evaluation boards (e.g., EVAL-AD5242) for prototyping. Bulk purchases (100+ units) often reduce per-unit costs by 15-30%. For custom configurations (e.g., tape-and-reel packaging), contact Analog Devices directly for minimum order quantities (MOQs) and extended temperature variants.

Related Manufacturers