Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

ACS714LLCTR-05B

Updated: 2026-07-15

Overview

The ACS714LLCTR-05B is a Hall-effect-based linear current sensor IC manufactured by Allegro MicroSystems. This surface-mount device provides precise current sensing solutions for both AC and DC applications with a measurement range of ±5A. The sensor operates on a 5V supply and delivers an analog output voltage that's proportional to the current flowing through the integrated low-resistance conductor. Its compact SOIC8 package makes it suitable for space-constrained applications while maintaining excellent thermal performance.

Structure and Working Principle

ACS714LLCTR-05B-T 电子元器件 ALLEGRO 批次24+深圳市亚泰盈科电子有限公司

The ACS714LLCTR-05B integrates a precision linear Hall sensor circuit with a low-resistance current path. When current flows through this path, it generates a magnetic field that the Hall sensor converts to a proportional voltage output. The device features a 1.2mΩ internal conductor resistance, minimizing power loss and heat generation. The output voltage is ratiometric to the supply voltage, with a typical sensitivity of 185mV/A. Electrical isolation between the current path and sensor circuit (up to 2.1kV) enhances safety in high-voltage applications.

商家经验真实案例 · 安全可信
单按钮开关接线指南
本文详细介绍了单按钮开关的接线方法,包括所需工具、接线步骤以及常见问题解决方案。通过清晰的步骤说明和实用建议,帮助读者轻松掌握单按钮开关的接线技巧。

Key Features

The ACS714LLCTR-05B offers several notable features including low-noise analog signal path with 80kHz bandwidth, making it suitable for both steady-state and dynamic current measurements. Key specifications include ±1.5% typical total output error at 25°C, 3μs output rise time, and operation across -40°C to +85°C temperature range. The device also provides overcurrent detection capability and is lead-free and RoHS compliant for environmental regulations compliance.

Application Areas

This current sensor finds extensive use in industrial motor control systems for current monitoring and overload protection. It's also widely employed in automotive applications like battery management systems and electric power steering. Other common applications include power supplies, inverters, and load detection systems in consumer electronics. The device's galvanic isolation makes it particularly valuable in applications requiring current measurement in high-voltage circuits without direct electrical connection.

Maintenance and Precautions

ACS714LLCTR-05B 电子元器件 ALLEGRO/雅丽高 封装SOP-8 批号25+深圳市汇莱威科技有限公司

For optimal performance, the ACS714LLCTR-05B requires proper PCB layout practices including use of ground planes and minimizing trace lengths to reduce noise. Thermal considerations are important as the internal conductor resistance causes heating at high currents. Adequate copper area on the PCB helps dissipate heat. The device should be protected from mechanical stress and moisture, especially in harsh industrial environments.

商家经验真实案例 · 安全可信
ASR是什么开关
本文解析ASR开关的定义、工作原理及在工业设备中的应用场景,帮助读者理解这一关键电气元件的功能特点。

B2B Procurement Guide

When procuring the ACS714LLCTR-05B in bulk, consider lead times which typically range from 8-12 weeks for large orders. Verify manufacturer authenticity as counterfeit components can be an issue in the semiconductor market. Evaluate total cost of ownership including potential need for calibration equipment or interface circuitry. For high-reliability applications, request full datasheet and consider extended temperature range variants if operating outside -40°C to +85°C.

Related Manufacturers