Aicaigou LogoB2B WikiIndustrial Encyclopedia

Acrylate Marking Paint

Updated: 2026-07-15

Overview

Acrylate marking paint is a solvent-based or water-based coating formulated from acrylic ester copolymers, pigments, and additives. It is engineered for high durability and visibility in outdoor and industrial environments. The paint forms a tough, flexible film upon drying, resistant to abrasion from vehicular traffic and harsh weather conditions. Unlike traditional oil-based paints, acrylate variants dry rapidly (10-30 minutes) and emit lower volatile organic compounds (VOCs) in water-based formulations. They are widely adopted in traffic management systems due to their reflectivity (when combined with glass beads) and color stability under UV exposure.

Physical and Chemical Properties

气相纳米二氧化硅乳液 水工混凝土建筑物修补加固 水性丙烯酸酯标志漆 防爆绝缘胶泥 水溶型聚氯乙烯弹性防水涂料潍坊鹏豪建筑材料有限公司

The paint exhibits a density of 1.1-1.3 g/cm³ and typically appears as a viscous liquid in white, yellow, or other high-visibility colors. Its thermosetting nature prevents re-melting after curing. Key chemical properties include insolubility in water and compatibility with hydrocarbons like xylene for viscosity adjustment. Performance-wise, it achieves a tensile strength of 3-5 MPa and elongation at break of 150-300%, ensuring crack resistance under thermal expansion. The inclusion of titanium dioxide (TiO2) enhances opacity, while UV stabilizers like hindered amine light stabilizers (HALS) prolong service life to 1-3 years outdoors.

商家经验真实案例 · 安全可信
光伏倒水槽
本文解析光伏倒水槽的结构原理与安装要点,探讨其在光伏电站排水系统中的关键作用,并分享延长使用寿命的实用技巧。

Main Applications

Primary use cases include road markings (e.g., lane dividers, crosswalks) where retroreflective properties are critical for nighttime visibility. Industrial applications encompass warehouse floor markings for safety zones, equipment pathways, and hazard warnings. Airports utilize specialized heat-resistant formulations for runway demarcation. In B2B contexts, customized blends are available for specific substrates like asphalt, concrete, or metal. Anti-slip variants incorporate aggregates like quartz sand for wet environments. Niche uses include sports court markings and temporary construction site signage due to the paint’s balance of durability and removability.

Safety and Storage

环氧树脂胶泥修补层 水泥基铁基自流平砂浆 单组分硅烷封端聚醚防霉密封胶 改性聚氨酯混凝土(ECO型号) 水性丙烯酸酯标志漆潍坊长旭建筑材料有限公司

As a flammable liquid, acrylate marking paint requires storage in certified containers away from ignition sources. Water-based types reduce fire risk but may still contain 5-10% organic solvents. Personal protective equipment (PPE) such as nitrile gloves and respirators is recommended during application to minimize inhalation and dermal exposure. Unused paint should be stored at stable temperatures (5-30°C) to prevent separation or premature polymerization. Containers must be tightly sealed to avoid solvent evaporation, which alters viscosity. Disposal follows local regulations for hazardous waste, particularly for solvent-heavy formulations.

商家经验真实案例 · 安全可信
坡屋面瓦片防坠落
本文探讨坡屋面瓦片防坠落的常见问题及解决方案,分析瓦片脱落的原因,提供实用的预防措施和维护建议,帮助延长屋面使用寿命并保障安全。

B2B Procurement Guide

When sourcing acrylate marking paint, prioritize suppliers with ISO 9001 certification and material safety data sheets (MSDS). Key procurement metrics include drying time (affecting project timelines), VOC content (for environmental compliance), and adhesion strength (tested via ASTM D3359). Bulk buyers should negotiate pricing for volumes exceeding 1 ton, with discounts of 10-15% common. Consider regional logistics—water-based paints may require temperature-controlled transport. For specialized needs (e.g., extreme climates), request technical datasheets verifying performance at -30°C or +50°C.

Related Manufacturers