Overview
Acidic lining materials are engineered refractory products designed for metallurgical and ceramic processing equipment exposed to acidic environments. These silica-dominant compositions (typically 85-98% SiO₂) form chemically stable barriers against corrosive slags in steelmaking furnaces and non-ferrous metal production. Developed as an alternative to basic linings for specific smelting conditions, they demonstrate superior performance in processes generating silica-rich slags with low basicity indexes. Industrial adoption accelerated in the 1970s with advancements in silica purification and bonding technologies. Modern formulations incorporate minor additives like zirconia or alumina to enhance thermal shock resistance while maintaining essential acid-resistant characteristics. These materials are supplied as ramming mixes, precast shapes, or gunning compounds tailored to furnace maintenance requirements.
Physical and Chemical Properties
The material's performance stems from its high silica content, which forms viscous silicate layers when exposed to heat, effectively sealing pores against slag penetration. Typical bulk densities range 1.8-2.2 g/cm³ after installation, with apparent porosity below 18% for premium grades. Thermal conductivity measures 1.0-1.5 W/(m·K) at 1,000°C, balancing insulation and heat transfer needs in furnace operations. Chemically, the lining maintains stability in pH environments below 7, resisting dissolution by acidic fluxes like iron silicate slags. Its acid dissolution rate is typically <0.5 g/cm²·h when exposed to CaO-SiO₂-FeO slags at 1,600°C. The material exhibits moderate thermal expansion (0.6-1.2% linear expansion at 1,200°C) managed through controlled quartz conversion during initial heat-up cycles.
Main Applications
Primary use occurs in electric arc furnace (EAF) sidewalls and roofs for carbon steel production, where silica-based slags predominate. Induction furnaces for cast iron and non-ferrous alloys (particularly copper-based) extensively employ acidic linings due to their compatibility with silica fluxing systems. Secondary applications include ladle backup linings and tundish working linings in continuous casting operations. In foundries, these materials line coreless induction furnaces for gray iron melting, offering 200-400 heats per campaign depending on operating temperatures. Specialty ceramics production utilizes acidic linings for feldspathic and quartz-based glaze melting kilns, where alkali resistance is unnecessary. The material's low iron oxide content (<0.5% in premium grades) makes it suitable for high-purity alloy production.
Safety and Storage
Installation requires NIOSH-approved N95 respirators due to respirable crystalline silica content (typically 15-30% in raw materials). MSDS sheets must accompany shipments, with OSHA permissible exposure limits (PEL) of 50 μg/m³ for 8-hour TWA. Storage areas should maintain <60% humidity to prevent hydration of chemical binders in pre-mixed products. Thermal cycling procedures are critical during initial furnace commissioning. A controlled ramp rate of 50-100°C/hour through the 573°C quartz inversion point prevents structural damage. Spent linings require special disposal as non-hazardous industrial waste in most jurisdictions, though local regulations may classify them as silica-containing materials requiring controlled landfill placement.
B2B Procurement Guide
Industrial buyers should specify SiO₂ content (≥92% for severe service conditions) and maximum impurity levels (Al₂O₃ <5%, Fe₂O₃ <1%). Bulk density and cold crushing strength (CCS >15 MPa) indicate installation durability. For gunning applications, particle size distribution (70% between 1-3 mm) ensures proper pneumatic delivery and layer adhesion. Leading manufacturers include RHI Magnesita, Vesuvius, and Shinagawa Refractories. Pricing correlates with purity - standard grades (90-92% SiO₂) cost $800-1,100/ton, while high-purity (>96% SiO₂) formulations command $1,200-1,500/ton. Minimum orders typically range 20-30 tons for bulk shipments, with lead times of 4-8 weeks for customized compositions. Quality certifications to check include ISO 9001 and ASTM C416 for silica refractories.
Related Manufacturers
- 主营：高铝砖、刚玉砖、硅莫复合砖、耐火材料、耐火浇注料、高铝浇注料、钢纤维浇注料、耐火喷涂料、耐火可塑料、耐火粘土砖、碳化硅砖、低气孔粘土砖、莫来石砖、轻质保温砖
- 主营：高铝砖、粘土砖、浇注料、耐火水泥、陶瓷蓄热体、蓄热球、耐酸砖、石棉绳、扇形砖、纤维纸、窑车砖、硅莫砖、莫来石砖、刚玉砖、喷涂料、捣打料、耐火砖
- 主营：高岭土、铝矾土、高铝粉、炉衬料、石英砂、石英粉、长石粉、高铝砂、玻璃粉、电熔镁砂、锆英砂、金刚砂、矿渣粉、重晶石粉、彩砂、重金石、钙粉
- 主营：麦饭石粉、滑石粉、沸石粉、炉衬材料、氧化钙、膨润土、白云石粉、橡胶粉、石英粉、硅微粉、碳酸钙、石墨、硅藻土、抗菌粉、氢氧化钙、消石灰、陶土、活性白土、金刚砂、木粉、磁粉、海泡石粉、二氧化硅、高岭土、负离子粉
- 主营：轻质碳酸钙、4A沸石粉、膨润土、炉衬材料、重晶石粉、配重铁粉 铁砂、氢氧化钙、红陶土 黄陶土、木粉、麦饭石粉、沸石粉、煅烧高岭土、水洗高岭土、滑石粉、负离子粉、硅藻土、白云石粉、玻璃鳞片、高铝耐火粉、蓝晶石粉
- 主营：碳酸钙、石英砂、金刚砂、酸性炉衬材料、滑石粉、矿粉、微硅粉、染色砂、陶瓷球、高岭土、鹅卵石
- 主营：耐火砖、耐火水泥、耐火砂、耐火材料、高铝耐火砖、刚玉耐火砖、耐火浇注料、轻质浇注料、耐火匣钵
- 主营：中频感应炉、水冷冷却塔、中频感应电源、中频感应透热炉、中频感应熔炼炉、感应加热真空炉
- 主营：耐火浇注料、高效除渣剂、铝矾土高铝细粉、酸性炉衬材料、中性炉衬材料、刚玉炉衬料、石墨化增碳剂、透热炉打结料、线圈胶泥、导电粉、中间包可塑料、打炉料、干振料、硅藻土、电气石托玛琳粉、膨润土、重晶石硫酸钡粉、蛭石、高岭土、橡胶颗粒粉、石英沙石英粉、绿泥白泥修补料、凹凸棒土、重质轻质碳酸钙、雨花石炉料
- 主营：铝矾土、线圈胶泥、捣打料、感应电炉炉衬、酸性炉衬材料、中性炉衬材料、中频炉炉衬料、干振料、加热炉浇灌料、硅质打炉料、中间包可塑料、可塑快速修补料、石英砂、高岭土、透热炉打结料、橡胶颗粒、氢氧化钙、机制木炭、膨润土、绿泥白泥修补料、火山石板材、氧化钙、凹凸棒土粉、沸石粉沸石颗粒
- 主营：高铝粉、玻璃粉、碳酸钙、铝矾土粉、炼铝铝矾、高岭土粉、精致石英砂
- 主营：金刚砂、耐火砖、耐火土、无水炮泥、浇注料/捣打料、耐火水泥、催化剂载体、白刚玉、棕刚玉、蓄热球
- 主营：耐火炉料、石英砂捣打料、透热炉打结料、中性炉衬、酸性打炉料、硅质炉衬料、酸性铸铁炉衬料、酸性干振料、炉衬材料、线圈胶泥红泥、中性打炉料、线圈浆料红泥、加热炉浇灌料、捣打料浇注料、铁水包钢水包捣打料、可塑快速修补料、可塑性修补料、硅质打炉料、刚玉干振干捣料、中性炉料、干振料、干打料、打炉料、干捣料、机制木炭果木炭
- 主营：干振料、铸钢炉料、中性干打料、中性炉衬料、不锈钢炉料
- 主营：出铁沟高档浇注料、高档泥套料、铁水罐浇注料、灌浆料、陶瓷耐磨料、铁屑填料、泥包料、钢包浇注料、干式振动料、焦炉用浇注料、加热炉用浇注料
- 主营：真石漆、陶瓷球、扩香石、保温材料、中性炉衬材料、火山石、玻璃砂、暖宝贴、火焰石、莫来砂、花盆土、鹅卵石、填香炉、黑金砂石、建筑石子、碳酸钙粉、机制木炭、养花园艺、装饰摆件、金色彩砂、防水地坪、石英砂滤料、石英砂炉料、中频炉胶泥、家装彩石扁珠