Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

88h159 Pressure Sensor

Updated: 2026-07-23

Overview

The 88H159 pressure sensor is a mid-range industrial sensor designed for reliable performance in demanding environments. It utilizes a piezoresistive sensing element housed in a durable stainless steel body, making it suitable for both liquid and gas pressure measurement. As a standardized component in automation systems, it provides 4-20mA or 0-10V output signals compatible with most PLCs and control systems. The sensor meets IP65 ingress protection standards, ensuring operation in dusty or humid conditions common in industrial settings.

Structure and Working Principle

用于气动装置的压力传感器 型号PQ3834 倾斜 LED 显示屏深圳市宝芯微科技有限公司

The sensor consists of three main components: a pressure port (G1/4" or NPT threaded), a sensing diaphragm with strain gauges, and signal conditioning electronics. When pressure is applied, the diaphragm deflects, causing resistance changes in the Wheatstone bridge circuit. The integrated ASIC (Application-Specific Integrated Circuit) amplifies and linearizes the signal before output. This design compensates for temperature effects, providing stable readings across the specified operating range. The hermetic sealing prevents media leakage while allowing accurate pressure transmission to the sensing element.

商家经验真实案例 · 安全可信
3kw工业机器人待机功率
本文解析3kW工业机器人在待机状态下的实际功耗表现,探讨待机功耗与额定功率的关系,并给出降低待机能耗的实用建议。

Key Features

1. Measurement Range: Typically 0-10bar to 0-600bar options 2. Accuracy: ±0.5% full scale (optional ±0.25% available) 3. Long-term stability: <±0.1% FS/year 4. Media Compatibility: Oil, water, air, mild corrosives (special versions for aggressive media) Additional features include reverse polarity protection, short-circuit proof output, and vibration resistance up to 20g. The sensors are calibrated at factory using traceable standards, with optional NIST-certified calibration for critical applications.

Application Areas

Primary industrial uses include: - Hydraulic power units monitoring - Compressed air system control - Pump and valve condition monitoring Commercial applications cover building automation (chiller pressure), water treatment plants, and mobile equipment. The 88H159 is particularly valued in OEM machinery where consistent batch-to-batch performance is required. Special versions with ATEX certification are available for explosive atmospheres.

Maintenance and Precautions

端子压力管理装置 压力传感器 测量精准 浩锐拓深圳市浩锐拓科技有限公司

Routine maintenance involves visual inspection for leaks and verification against a master gauge annually. Avoid exposing the sensor to pressure spikes exceeding 150% of rated range, which may damage the sensing diaphragm. When installing, ensure proper thread sealing (PTFE tape or liquid sealant) without over-tightening. For liquid media, mounting the sensor vertically (port facing down) prevents air bubble accumulation. Electrical connections should use shielded cables grounded at one end to minimize noise interference.

商家经验真实案例 · 安全可信
岩巷需要安装顶板离层仪吗
本文探讨岩巷是否需安装顶板离层仪,分析其必要性、适用场景及监测价值,帮助工程人员做出合理决策。

B2B Procurement Guide

Industrial buyers should specify: 1. Pressure range and units (bar/psi/kPa) 2. Electrical output type and supply voltage 3. Process connection thread standard 4. Special requirements (certifications, media compatibility) Lead times typically range from 2-6 weeks for standard configurations, with expedited options available. Bulk purchases (50+ units) often qualify for 15-20% discounts. Consider ordering spare sealing kits (O-rings/gaskets) for maintenance. Reputable manufacturers provide 2-3 year warranties covering material and workmanship defects.

Related Manufacturers