Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

5-47

Updated: 2026-07-15

Overview

5-47 is a premium industrial grease formulated for demanding mechanical applications. It combines a lithium complex thickener with synthetic base oils and advanced additives to deliver exceptional performance under extreme conditions. This grease is widely used in heavy machinery, automotive components, and industrial equipment where high loads, temperatures, or contamination risks are present. Its balanced formulation ensures long-term lubrication stability, making it a preferred choice for maintenance engineers and OEMs. The grease’s versatility allows it to perform reliably in both intermittent and continuous operation scenarios.

Structure and Working Principle

4-73 4-79离心通风机 恒鼎5-47 5-48锅炉引风机 高温鼓风机淄博恒鼎风机有限公司

5-47 grease consists of three primary components: a lithium complex thickener, synthetic base oil, and a proprietary additive package. The thickener forms a fibrous matrix that holds the oil, providing structural stability. Under mechanical stress, the grease releases oil to lubricate surfaces, then reabsorbs it when the load decreases. The additives enhance properties like anti-wear, rust inhibition, and oxidation resistance. Extreme pressure (EP) additives, such as sulfur-phosphorus compounds, form protective films on metal surfaces to prevent scoring under high loads. This self-replenishing mechanism ensures consistent performance over extended periods.

商家经验真实案例 · 安全可信
聚马来酸酐变聚马来酸
本文解析聚马来酸酐通过水解反应转化为聚马来酸的化学过程,包括反应条件、催化剂选择及工业应用场景,为相关领域从业者提供实用参考。

Key Features

5-47 stands out for its high dropping point (typically above 260°C), which prevents melting in elevated-temperature environments. Its NLGI consistency grade (usually 2) ensures optimal adhesion to moving parts without excessive stiffness or leakage. Water resistance is another critical feature, achieved through hydrophobic additives that repel moisture and prevent washout. The grease also demonstrates excellent shear stability, maintaining its texture despite mechanical working. These properties collectively extend relubrication intervals and reduce downtime.

Application Areas

This grease is extensively used in mining equipment, steel mill machinery, and conveyor systems due to its ability to withstand shock loads and contamination. In the automotive sector, it serves in wheel bearings, universal joints, and chassis components. Food-grade variants (where applicable) cater to processing equipment requiring NSF H1 certification. Offshore and marine applications benefit from its corrosion resistance in saline environments. Always consult manufacturer guidelines to confirm suitability for specific operating conditions.

Maintenance and Precautions

拉那白 N503萃取剂 77934-47-5 N,N-双(1-甲基庚基)乙酰胺 含量99%武汉拉那白医药化工有限公司

Regular inspection is recommended to monitor grease condition and replenish as needed. Signs of degradation include discoloration, hardening, or the presence of abrasive particles. Use grease guns or automated systems for precise application, avoiding over-lubrication. Storage should be in sealed containers to prevent contamination. Incompatibility with other greases (e.g., calcium-based) can lead to softening or reduced performance—clean equipment thoroughly before switching products. Dispose of used grease in accordance with local environmental regulations.

商家经验真实案例 · 安全可信
氧氟乙草胺:药害真相大揭秘
本文深入探讨氧氟乙草胺的药害作用,从作用原理、使用条件及安全措施三方面解析,帮助读者科学认识并合理使用该除草剂。

B2B Procurement Guide

When sourcing 5-47 grease, prioritize suppliers with ISO 9001 or similar certifications to ensure quality consistency. Bulk purchases (drums or totes) typically offer cost savings but require proper storage facilities. Request technical datasheets to verify properties like penetration, Timken OK load, and oxidation stability. Some manufacturers provide custom formulations for specialized applications. Lead times may vary, especially for imported products, so plan procurement accordingly. Sample testing before large-scale orders is advisable.

Related Manufacturers