Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

2N7002KV

Updated: 2026-07-15

Overview

The 2N7002KV is an N-channel enhancement-mode MOSFET commonly used in low-power switching applications. It is favored for its low threshold voltage, typically around 1V, making it suitable for battery-operated devices and other low-voltage circuits. The MOSFET operates efficiently in high-speed switching environments, offering reliable performance with minimal power loss. Due to its compact size and robust design, the 2N7002KV is widely integrated into consumer electronics, automotive systems, and industrial control circuits. Its ability to handle moderate current levels (up to 200mA) and voltages (up to 60V) makes it a versatile component for various electronic designs.

Structure and Working Principle

NVTFS5820NLTAG NTTFS5820NLTAG 电子元器件 DFN3X3 资料 规格书深圳市南科功率半导体有限公司

The 2N7002KV consists of a silicon-based N-channel MOSFET structure with three terminals: gate (G), drain (D), and source (S). When a positive voltage is applied to the gate relative to the source, it creates an electric field that forms a conductive channel between the drain and source, allowing current to flow. The enhancement-mode design means the device remains off when no voltage is applied to the gate, ensuring no unintended current flow. Its low on-resistance (typically around 5 ohms) minimizes power dissipation during operation, enhancing efficiency in switching applications.

商家经验真实案例 · 安全可信
sic功率器件解析
本文详细介绍了sic功率器件的基本概念、核心优势以及在工业领域的具体应用场景,帮助读者全面理解这一高性能电子元件的价值。

Key Features

One of the standout features of the 2N7002KV is its low threshold voltage, which enables operation with minimal gate drive requirements. This makes it ideal for use in low-power circuits where energy efficiency is critical. Additionally, its fast switching speed reduces transition losses, improving overall system performance. The MOSFET also exhibits low input capacitance, further enhancing its suitability for high-frequency applications. Its robust construction ensures reliability under varying environmental conditions, making it a preferred choice for automotive and industrial applications.

Application Areas

The 2N7002KV is extensively used in load switching, signal amplification, and power management circuits. In consumer electronics, it is commonly found in portable devices, such as smartphones and tablets, where efficient power handling is essential. Automotive systems leverage this MOSFET for lighting controls, sensor interfaces, and other low-power switching tasks. Industrial applications include motor drivers, relay replacements, and automation controls, where its reliability and efficiency are highly valued.

Maintenance and Precautions

龙腾SJ超结MOS 低导通电阻 LSE60R069GF 长期可靠深圳源芯半导体有限公司

To ensure optimal performance and longevity, avoid exceeding the device's maximum voltage and current ratings. Overloading the MOSFET can lead to thermal runaway and permanent damage. Proper heat dissipation measures, such as using a heatsink or ensuring adequate airflow, are recommended for high-current applications. Static electricity can also damage the gate oxide layer, so handle the component with anti-static precautions. Always refer to the manufacturer's datasheet for specific operating conditions and limitations.

商家经验真实案例 · 安全可信
EIT设备大吗
本文解析EIT设备的体积特点,包括常见尺寸范围、影响设备大小的关键因素,以及不同应用场景下的体积差异,帮助读者直观了解EIT设备的空间占用情况。

B2B Procurement Guide

When procuring the 2N7002KV in bulk, verify the supplier's authenticity and quality certifications to avoid counterfeit components. Request samples for testing before placing large orders to ensure compatibility with your application. Compare pricing from multiple suppliers, keeping in mind that prices may vary based on order quantity and packaging options. Established distributors like Digi-Key, Mouser, and Arrow Electronics are reliable sources for genuine components. Lead times and minimum order quantities should also be considered during procurement planning.

Related Manufacturers