Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

2N2907 Transistor

Updated: 2026-07-19

Overview

The 2N2907 is a PNP bipolar junction transistor (BJT) that has been a staple in electronic circuits for decades. It is designed for general-purpose amplification and switching applications, offering a balance of performance and reliability. The transistor is housed in a TO-18 metal can package, which provides durability and efficient heat dissipation. As a PNP transistor, the 2N2907 is particularly useful in circuits where a negative voltage is required for operation. Its robust design makes it suitable for a wide range of industrial and consumer electronics, from audio amplifiers to power supply regulators.

Structure and Working Principle

2N2907A PNP型晶体管 ST/先科代理 双极三极管 直插 封装TO-92东莞市鑫沐电子有限公司

The 2N2907 consists of three semiconductor layers: the emitter, base, and collector. In a PNP transistor, the emitter emits holes (positive charge carriers) which are collected by the collector, with the base controlling the flow. The transistor operates by modulating the current between the emitter and collector through the base current. When a small current is applied to the base, it allows a larger current to flow from the emitter to the collector. This property makes the 2N2907 ideal for amplification and switching, where precise control of current flow is essential.

商家经验真实案例 · 安全可信
din16901解析
本文深入探讨din16901的应用领域、技术特点及其在实际生产中的作用,帮助读者更好地理解这一规范的重要性和使用方法。

Key Features

One of the standout features of the 2N2907 is its high current gain (hFE), which typically ranges from 100 to 300. This makes it highly efficient in amplifying weak signals. Additionally, it has a low saturation voltage, ensuring minimal power loss during operation. The transistor also boasts a robust construction, capable of handling collector currents up to 600 mA and collector-emitter voltages up to 60 V. These specifications make it versatile for various applications, from low-power circuits to more demanding industrial uses.

Application Areas

The 2N2907 is widely used in audio amplifiers, signal processing circuits, and power supply regulators. Its ability to handle moderate power levels makes it a popular choice for hobbyists and professionals alike. In industrial settings, the transistor is often employed in control systems and switching applications, where reliability and performance are critical. Its compatibility with a wide range of electronic components further enhances its utility in diverse circuit designs.

Maintenance and Precautions

2N2907A 三极管 ST 基极反向电流 电流放大系数 发射极反向击穿电压深圳市龙宏电子科技有限公司

To ensure longevity, avoid exceeding the transistor's maximum ratings for voltage, current, and power dissipation. Overloading can lead to thermal runaway and permanent damage. Proper heat sinking is recommended for high-current applications. When soldering, use a heat sink clip to protect the transistor from excessive heat. Additionally, static electricity can damage the device, so handle it with anti-static precautions, especially in sensitive electronic environments.

商家经验真实案例 · 安全可信
冷铁碳化物经adi淬火消除
本文探讨冷铁位置碳化物通过等温淬火(ADI)处理的消除可能性,分析其原理、影响因素及实际效果,为工业热处理提供参考。

B2B Procurement Guide

When sourcing the 2N2907 in bulk, verify the authenticity of the supplier to avoid counterfeit components. Reputable distributors often provide datasheets and certification to ensure quality. Consider the transistor's specifications, such as current gain and voltage ratings, to match your circuit requirements. Pricing can vary based on quantity and supplier, so request quotes from multiple vendors for the best deal. Lead times may also differ, so plan your procurement accordingly.

Related Manufacturers