Aicaigou LogoB2B WikiIndustrial Encyclopedia

25LC160D-I/P

Updated: 2026-08-20

Overview

The 25LC160D-I/P is a 16 Kbit Serial Peripheral Interface (SPI) Electrically Erasable Programmable Read-Only Memory (EEPROM) manufactured by Microchip Technology. It is designed for applications requiring reliable non-volatile memory with low power consumption and high endurance. The device is widely used in industrial, automotive, and consumer electronics due to its robust performance and ease of integration. The 25LC160D-I/P operates over a wide voltage range (2.5V to 5.5V), making it suitable for battery-powered and low-voltage systems. It supports clock frequencies up to 10 MHz, enabling fast data transfer rates. The EEPROM also includes hardware write protection to prevent accidental data corruption.

Structure and Working Principle

SMJ/AS27C010A 集成电路(IC) LCC32 资料 规格书 数据手册深圳市科美奇科技有限公司

The 25LC160D-I/P is built using semiconductor technology, with memory cells arranged in a grid pattern. Data is stored as charge in floating-gate transistors, which retain information even when power is removed. The SPI interface allows for simple communication with microcontrollers and other digital devices, using four signal lines: Chip Select (CS), Serial Clock (SCK), Serial Data Input (SI), and Serial Data Output (SO). When writing data, the microcontroller sends commands and data through the SPI interface, which the EEPROM processes and stores. Reading data involves sending a command followed by the memory address, after which the EEPROM returns the stored data. The device supports sequential read and write operations, improving efficiency for large data transfers.

商家经验真实案例 · 安全可信
uc3842与uc3845互换吗
本文解析uc3842与uc3845两款PWM控制芯片的异同,包括关键参数对比、互换条件及潜在风险,帮助工程师在实际应用中做出合理选择。

Key Features

The 25LC160D-I/P offers several key features that make it suitable for a variety of applications. Its low power consumption is ideal for battery-operated devices, with standby current as low as 1 µA. The wide voltage range ensures compatibility with different power supplies, while the high-speed SPI interface enables rapid data access. The EEPROM also includes built-in write protection, which can be enabled or disabled via hardware pins or software commands. This feature prevents accidental overwrites, enhancing data integrity. Additionally, the device has a high endurance rating, supporting up to 1 million write cycles per memory cell, and data retention of up to 200 years.

Application Areas

The 25LC160D-I/P is used in a wide range of applications, including industrial automation, automotive systems, and consumer electronics. In industrial settings, it stores configuration data, calibration parameters, and event logs for equipment. Automotive applications include storing firmware, sensor data, and vehicle settings in infotainment systems and engine control units. Consumer electronics such as smart home devices, wearables, and gaming consoles use the 25LC160D-I/P for firmware storage and user preferences. Its reliability and low power consumption make it a popular choice for IoT devices, where energy efficiency and data retention are critical.

Maintenance and Precautions

25LC160D-I/P 存储IC MICROCHIP/微芯 封装DIP 批号24+深圳市纳艾斯科技有限公司

To ensure the longevity and reliability of the 25LC160D-I/P, proper handling and storage are essential. Avoid exposing the device to electrostatic discharge (ESD) by using grounded workstations and anti-static packaging. Operating and storage temperatures should remain within the specified range (-40°C to +85°C) to prevent damage. When soldering the EEPROM, follow recommended reflow profiles to avoid thermal stress. Excessive heat can degrade performance or cause permanent damage. Additionally, adhere to the maximum write cycle limits to prevent premature wear of memory cells.

商家经验真实案例 · 安全可信
1.5ke180ca参数解析
本文详细解析1.5ke180ca系列瞬态电压抑制二极管的参数特性,包括其峰值脉冲功率、击穿电压和电容值等关键指标,帮助工程师快速掌握该器件的选型要点。

B2B Procurement Guide

When procuring the 25LC160D-I/P, consider factors such as quantity, lead time, and supplier reliability. Bulk purchases typically offer lower per-unit costs, but ensure the supplier can meet your delivery schedule. Verify the authenticity of the components to avoid counterfeit products, which can compromise performance and reliability. It is also advisable to request samples for testing before placing large orders. Check for compliance with industry standards such as RoHS and REACH to ensure environmental and safety requirements are met. Finally, review the supplier's technical support and return policies to address potential issues promptly.

Related Manufacturers