Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

24FC08

Updated: 2026-07-19

Overview

The 24FC08 is an 8-kilobit serial EEPROM memory chip manufactured using CMOS technology. It features an I2C interface, making it compatible with a wide range of microcontrollers and digital systems. This non-volatile memory solution is commonly used for parameter storage, configuration data, and small-scale data logging applications. As part of the 24XX series, the 24FC08 offers reliable performance with low power consumption, making it suitable for battery-powered devices. Its small footprint and standardized interface have made it a popular choice across various industries, from automotive electronics to smart home devices.

Structure and Working Principle

IFM传感器O2D105 O2D106 O2D107 O2D220 O2D222 O2D224现货O2D907 O2D908上海泽旭自动化设备有限公司

The 24FC08 consists of a memory array organized as 1024 × 8 bits, with single-byte and page write capabilities (up to 16 bytes). The chip operates through a simple two-wire I2C interface (SCL for clock and SDA for data), supporting standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) communication speeds. Internally, the device includes address latches, a control logic unit, and high-voltage generation circuitry for programming operations. Data retention is typically guaranteed for 200 years, with endurance of at least 1 million write cycles per byte. The chip incorporates write protection features that can be enabled via software control.

商家经验真实案例 · 安全可信
传感器GND能直连控制板吗
本文探讨传感器接地(GND)能否直接连接控制板的问题,分析直接连接的潜在风险与解决方案,并提供实用的电路设计建议,帮助读者避免常见错误。

Key Features

The 24FC08 stands out for its wide operating voltage range (1.7V to 5.5V), allowing use in both low-power and standard voltage systems. Its low standby current (1 μA typical) makes it ideal for battery-operated devices. The memory supports sequential read operations for efficient data retrieval. Additional features include built-in noise suppression, Schmitt trigger inputs for improved signal integrity, and a write-protect pin for hardware protection. The device is available in multiple package options including PDIP, SOIC, TSSOP, and chip-scale packages, offering flexibility for different PCB layouts and space constraints.

Application Areas

This EEPROM finds extensive use in consumer electronics such as smart TVs, set-top boxes, and audio equipment for storing user preferences and firmware parameters. Industrial applications include sensor calibration data storage, equipment configuration backup, and event logging in automation systems. In the automotive sector, the 24FC08 is used for storing odometer readings and ECU parameters. Medical devices utilize it for equipment settings and usage history. The chip's reliability and small form factor also make it suitable for IoT devices and wearable technology where space and power efficiency are critical.

Maintenance and Precautions

24FC08 电子元器件 MICROCHIP/微芯 封装8/TSSOP 批次24年深圳市富达微科技有限公司

When handling the 24FC08, proper ESD precautions should be observed to prevent damage to the sensitive CMOS circuitry. Storage should be in dry, anti-static packaging at room temperature. During PCB assembly, reflow soldering profiles should adhere to the manufacturer's specifications to prevent thermal damage. System designers should implement proper I2C bus termination and ensure signal integrity, especially in noisy environments. The write cycle time (typically 5 ms) must be respected between successive write operations. For critical applications, implement software checksums or error correction to verify data integrity.

商家经验真实案例 · 安全可信
逆变器交流端跳闸处理
本文解析逆变器交流端跳闸的常见原因及应对方法,包括检查负载匹配、排查线路故障、设备自检等实用步骤,帮助快速恢复设备运行。

B2B Procurement Guide

When procuring 24FC08 chips in bulk, verify the manufacturer's authenticity to avoid counterfeit components. Major producers include Microchip Technology and other semiconductor manufacturers. Consider lead time requirements as standard delivery for large quantities may take 6-8 weeks. Evaluate whether standard commercial grade (0°C to +70°C) or industrial temperature range (-40°C to +85°C) versions are needed. For high-reliability applications, request extended life or automotive-grade variants. Request samples for testing before large-scale purchases, and consider second-source options for supply chain redundancy.

Related Manufacturers