Aicaigou LogoB2B WikiIndustrial Encyclopedia

24AA128-I/MS

Updated: 2026-07-15

Overview

The 24AA128-I/MS is a 128Kb (16K x 8) serial EEPROM from Microchip Technology, designed for applications requiring reliable non-volatile memory. It operates via the I2C interface, supporting clock frequencies up to 400 kHz. This device is widely used in industrial, automotive, and consumer electronics due to its low power consumption and robust performance. The 24AA128-I/MS is housed in an MSOP package, making it suitable for space-constrained designs. It features a 256-byte page write buffer, allowing efficient data storage and retrieval. Its wide voltage range (1.7V to 5.5V) ensures compatibility with various systems.

Structure and Working Principle

MC78L12ABPRPG 电源管理芯片 MICROCHIP 封装TO92 批次23+深圳市昊创电子有限公司

The 24AA128-I/MS consists of a memory array organized as 16,384 bytes of 8-bit each. It communicates via the I2C protocol, using two wires (SDA and SCL) for data transfer. The device supports both standard (100 kHz) and fast (400 kHz) I2C modes, providing flexibility in system design. Data is written to the EEPROM in pages of 256 bytes, reducing the number of write cycles and improving efficiency. The device includes built-in write protection features, such as a write-protect pin and software write protection, to prevent accidental data corruption.

商家经验真实案例 · 安全可信
1000w逆变板调试软件
本文解析1000w逆变板调试所需的软件工具,包括通用型开发环境和专用调试工具的特点,以及选择时需考虑的关键因素,帮助工程师高效完成调试任务。

Key Features

The 24AA128-I/MS offers several key features, including a wide operating voltage range (1.7V to 5.5V), making it suitable for battery-powered applications. Its low standby current (1 µA typical) ensures minimal power consumption during idle periods. The device also includes a sequential read function, allowing rapid retrieval of consecutive memory locations. Its endurance rating of 1 million write cycles and data retention of 200 years ensure long-term reliability in demanding environments.

Application Areas

The 24AA128-I/MS is commonly used in industrial automation systems for storing configuration data and calibration parameters. Its robustness and reliability make it ideal for automotive applications, such as infotainment systems and engine control units. In consumer electronics, this EEPROM is found in smart devices, wearables, and IoT products, where low power consumption and compact size are critical. It is also used in medical devices for storing patient data and device settings.

Maintenance and Precautions

PIC16C620AT-04/SO 集成电路、处理器、微控制器 MICROCHIP 封装SOIC 批次21+深圳市科创芯半导体有限公司

To ensure the longevity of the 24AA128-I/MS, avoid exceeding the maximum voltage ratings and adhere to the recommended operating conditions. ESD precautions should be taken during handling and installation to prevent damage to the sensitive semiconductor components. When designing the PCB, ensure proper decoupling capacitors are placed near the power pins to minimize noise. Avoid frequent write cycles to the same memory location to prevent premature wear-out of the EEPROM cells.

商家经验真实案例 · 安全可信
串口调试工具大全
本文全面介绍串口调试工具的常见类型、功能特点及适用场景,帮助读者快速选择适合的工具,提升工作效率。

B2B Procurement Guide

When procuring the 24AA128-I/MS, verify the authenticity of the supplier to avoid counterfeit components. Microchip Technology provides authorized distributors, and purchasing through these channels ensures genuine products. Consider bulk purchasing for cost savings, as prices typically decrease with higher order quantities. Lead times can vary, so plan procurement in advance to avoid project delays. Ensure the device meets the specific requirements of your application, such as operating voltage and I2C bus speed.

Related Manufacturers