Aicaigou LogoB2B Wiki

24AA1025-I/SM

Updated: 2026-07-31

Overview

The 24AA1025-I/SM is a 1 megabit (128K x 8) serial EEPROM memory device from Microchip Technology's 24AA series. It utilizes the I2C serial interface protocol, supporting clock frequencies up to 400 kHz. The device operates across a broad voltage range from 1.7V to 5.5V, making it versatile for various applications. With its small form factor (8-lead SOIC package) and low power consumption, this EEPROM is particularly suitable for space-constrained designs requiring reliable non-volatile memory. It offers 1 million erase/write cycles and data retention of over 200 years, ensuring long-term reliability.

Structure and Working Principle

The 24AA1025-I/SM consists of a memory array organized as 131,072 bytes of 8 bits each, accessed through a two-wire I2C interface (SCL for clock and SDA for data). The device incorporates an internal charge pump that enables single-supply operation while supporting the full erase/program voltage requirements. Memory access is controlled through I2C protocol commands, including device addressing, write operations, and sequential read operations. The chip features hardware write protection when the WP pin is asserted, preventing accidental data modification. Page write capability (up to 128 bytes) enhances programming efficiency.

Key Features

The 24AA1025-I/SM stands out for its wide operating voltage range (1.7V to 5.5V), allowing seamless integration with both 3.3V and 5V systems. Its low power consumption (standby current typically 1 μA) makes it ideal for battery-powered applications. Additional notable features include 64-byte page write buffer, built-in write protection, and industrial temperature range support (-40°C to +85°C). The device also offers three address pins (A0-A2) for hardware addressing, enabling up to eight devices on the same I2C bus.

Application Areas

This EEPROM is widely used in industrial automation systems for storing configuration parameters, calibration data, and event logs. In automotive electronics, it serves for storing vehicle settings and diagnostic information. The consumer electronics sector utilizes the 24AA1025-I/SM in smart home devices, wearables, and IoT products for firmware storage and user preference retention. Medical devices benefit from its reliability for critical data storage, while telecom equipment employs it for configuration backup.

Maintenance and Precautions

Proper handling with ESD precautions is essential during installation and maintenance. The device should not be subjected to voltages outside its specified range, as this may cause permanent damage. For optimal performance, ensure proper decoupling capacitors are placed near the power pins. When designing the PCB, follow recommended layout guidelines for the I2C lines, including appropriate pull-up resistors. Avoid exceeding maximum ratings for clock frequency, especially in high-temperature environments.

B2B Procurement Guide

When procuring 24AA1025-I/SM chips in bulk, verify the manufacturer's authenticity through authorized distributors to avoid counterfeit components. Consider lead time variations, as industrial-grade components may have longer delivery periods. Evaluate supplier certifications (such as ISO 9001) and request product traceability documentation. For automotive applications, confirm AEC-Q100 qualification status. Price breaks typically occur at quantity thresholds of 1,000, 5,000, and 10,000 units.

Related Manufacturers