Overview
The two-three claw puller is a specialized mechanical tool widely used in industrial maintenance, automotive repair, and machinery assembly. It features adjustable claws (typically two or three) that can be positioned to grip various components securely. The tool applies even pulling force to remove press-fitted parts without damaging them, making it indispensable for technicians and engineers. The design often includes a central forcing screw that generates the pulling force, while the claws distribute the load evenly around the part. This configuration helps prevent distortion or breakage of delicate components during removal. High-quality models are made from hardened steel to withstand significant mechanical stress.
Structure and Working Principle
A typical two-three claw puller consists of three main components: the adjustable claws, a central forcing screw, and a crossbar or yoke that connects the claws. The claws are mounted on pivots, allowing them to adapt to different part diameters. The forcing screw applies linear force to the part's shaft or center point while the claws counter this force by pulling outward. When the screw is turned clockwise, it pushes against the part's shaft while the claws grip the outer edge. This creates a controlled separation force that gradually extracts the component. Some advanced models include interchangeable claws or attachments for specialized applications, such as bearing pullers or gear removers.
Key Features
The primary advantage of this tool lies in its adjustable design, which allows it to handle a wide range of part sizes with a single tool. The claws can typically be reversed or repositioned to accommodate different extraction scenarios. High-quality models feature precision-machined threads on the forcing screw for smooth operation and reduced wear. Many industrial-grade pullers include additional features like forged construction for maximum strength, non-slip claw tips to prevent marring of surfaces, and heat-treated components for durability. Some versions incorporate a sliding hammer attachment point for use in stubborn removal situations where impact force is required.
Application Areas
Two-three claw pullers find extensive use in automotive workshops for removing gears, pulleys, and bearings from shafts. They are equally valuable in industrial maintenance for servicing pumps, motors, and other machinery. The tool's versatility makes it suitable for agricultural equipment repair, manufacturing plant maintenance, and even in some construction applications. In the bearing industry, specialized versions of these pullers are used to remove all types of bearings without damaging the bearing races or surrounding components. Electric motor repair shops frequently use them for armature and commutator removal. The ability to apply controlled force makes them preferable to hammer-based removal methods in precision applications.
Maintenance and Precautions
Proper maintenance of a claw puller involves regular cleaning after use and periodic lubrication of the screw threads. Storing the tool in a dry environment prevents rust formation, especially on high-carbon steel models. It's important to inspect the claws for signs of wear or deformation before each use, as damaged claws can fail under load. When using the tool, always ensure the claws are properly seated and the pulling force is applied along the shaft's axis to prevent cocking. Avoid exceeding the tool's rated capacity, and never use extension bars on the forcing screw handle as this can create dangerous torque levels. For particularly stubborn parts, applying penetrating oil before attempting removal can reduce the required force.
B2B Procurement Guide
When purchasing two-three claw pullers in bulk for industrial use, consider the range of sizes needed to cover your applications. Look for manufacturers that offer complete sets with interchangeable accessories. Quality indicators include forged rather than cast construction, precisely machined threads, and clearly marked load ratings. For procurement professionals, it's advisable to request samples for testing before large orders. Evaluate the tool's performance with your specific components and check the ergonomics for your technicians. Many suppliers offer custom configurations for specialized industrial applications, which can be cost-effective for operations with unique requirements.
Related Manufacturers
- 主营：矿用防爆电气、排型钢梁、矿用门、矿用气动工具、支护设备、铁路道岔、矿用检测仪报警仪传感器、矿用救护设备、矿用电子围栏、煤矿井下自动隔爆装置、蓄电池电机车、锚杆钻机、单体液压支柱、无压风门、回柱绞车、喷浆机、隔爆摄像仪、隔爆稳压电源、矿用本安型电磁阀
- 主营：挖掘机、消防服、灭火防护服、农用小挖机、消防训练靴、抢险救援靴、水田栽种机、双罐压缩机、户外伐木锯、消防救援靴、救援消防靴、两行插秧机、工程挖土机、便携式电锯、呼吸器充气泵、手持锂电电锯、手提木工链锯、履带式挖土机、两行水稻插秧机、消防抢险训练靴、应急抢险防护靴、消防气瓶充气机、充电迷你电链锯、高压空气压缩机
- 主营：电动工具、手动工具、地漏防臭神器
- 主营：闪光灯、摄影灯、扫地机、二三爪拆卸工具、压线钳、游泳池、台式机、气泵体、球栅尺、自测盒、打线槽、缝纫机、液压钳、煎药壶、减速机、配电箱、脚踏船、修剪机、测量仪、锂电池、除草机、洗手间、上下床、冰激凌、车丝机、铁架子
- 主营：压线钳、体脂秤、防尘袋、二爪轴承拔轮器、喷雾器、钢材机、电磁炉、修枝剪、蓄能器、圆度仪、液压钳、脚手架、测量仪、铁架台、铁夹子、报警器、切割机、控制器、打药机、端子钳、加油枪、嫁接刀、测试仪、水钻机、电子称、对刀仪
- 主营：气动铲、热风枪、拉马器、工具、除尘枪、角磨机、电磁阀、齿轮包、刻字笔、变频器、拉出器、粘接筒、焊接枪、密封圈、气动胶、喷漆枪、线轴承、调节阀、仪表阀、黄油枪、吹尘枪、磨光机、弹性圈、打磨机、气动剪、调压阀
- 主营：二三爪拉马器、电线电缆回收
- 主营：小轴承、遥控器、连接杆、拆卸工具、压线钳、浇花枪、卡箍管、浇水机、升降机、焊把线、丁兰尺、单向阀、分配器、玉米杆、止回阀、揉丝机、砂带机、抽水机、液压钳、手抛网、排线钳、抽水泵、螺丝刀、潜水泵、止逆阀、电焊机
- 主营：输送带切割机、液体千斤顶、液压扳手
- 主营：试压泵、注油机、拉拔器、感应拆卸、弯管机、滤油机、砂轮片、液压泵、硫化机、手动扩、扳手泵、同步阀、小吊车、fag轴承、清车机、拉伸器、千斤顶、炮采手动、液压螺母、液压开门、感应轴承、电动升降、气动扳手、电动道岔、油桶直角
- 主营：电动搬运坦克、搬运气垫、高压软气管、酸碱喷射器、螺旋千斤顶、机载临时支护装置、高位翻车机、道口栏木机、永磁除铁器、电动液压推杆、合金钻头、船用滑车、锚索张拉机具、矿用风门、矿用洗靴机、皮带清扫器、船用风机、喷浆机、泄爆牵引绞索、小型挖掘机、割草机、链轮组件、矿用三轮车、矿车轮对、空气锤
- 主营：镀锌管、对接机、套丝机、轴承拆卸、咬边机、风管机、维弯机、电动试压泵、热熔对焊机、滚动式弯管机、钢管切割机器、衬塑内层压槽机、电动钢管切管机、压力自控试压泵、衬塑管道压槽机
- 主营：凿岩机、矿车、调度绞车、二爪三爪液压拔轮器、耙斗装岩机、电磁启动器、U型钢支架
- 主营：草坪移植起草皮机、全自动遥控割草机、金属波纹管制管机、二次结构混凝土输送泵、外卡式管道切割坡口机、自动行走钢板铣边机、小车式电动液压升降拉马、道路热熔划线机、移动园林树木枝粉碎机、钢筋混凝土切墙机、电动铲车装载机、混凝土座驾抹光机、磁力火焰切割机、管道外对口器、马路切割刻纹机、全自动油桶洗桶机、地坪研磨抛光机、小型挖掘机、混凝土钻孔取芯机、苗床育秧粉土机、汽油骑乘座驾式割草机、小型振动压路机、多功能除雪扫雪清扫机、公路拦水带滑膜成型机、大铁桶拆解切桶机
- 主营：胡开文、砂带机、毛笔挂、二胡弓、纸挂轴、半生熟、传感器、裁剪机、小提琴、毛笔架、手工石、车挂饰、毛笔墨、打磨机、氩弧焊、木工凿、陶瓷碟、垫琴拖、增氧泵、冲击钻、电锤电、熟仿古、点火器、砂轮机、六角柄