Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

2-Methylpentane-2

Updated: 2026-07-19

Overview

2-Methylpentane is a branched-chain hydrocarbon belonging to the alkane family. As one of the isomers of hexane, it features a methyl group attached to the second carbon of a pentane chain. This structural difference gives it distinct physical and chemical properties compared to its straight-chain counterpart, n-hexane. Industrially, 2-methylpentane is produced through the refining of crude oil or via catalytic isomerization processes. Its relatively low boiling point and non-polar nature make it valuable as a solvent in various chemical processes and as a blending component in motor fuels to improve octane ratings.

Physical and Chemical Properties

拉那白 N235萃取剂 钴镍萃取液 三辛癸烷基叔胺 68814-95-9武汉拉那白医药化工有限公司

2-Methylpentane is a colorless liquid with a characteristic gasoline-like odor. It has a density of 0.653 g/cm³ at 20°C, making it less dense than water. The compound's branched structure results in a lower boiling point (60.3°C) compared to n-hexane (69°C), demonstrating how molecular structure affects physical properties. Chemically, 2-methylpentane exhibits typical alkane behavior - it undergoes combustion reactions and can participate in free radical substitution reactions. The compound is highly flammable with a flash point of -23°C and should be handled with appropriate safety measures. Its non-polar nature makes it an effective solvent for oils, fats, and many organic compounds while being immiscible with water.

商家经验真实案例 · 安全可信
甲烷二磺酸亚甲酯生产
本文详细解析甲烷二磺酸亚甲酯的工业化生产流程,包括原料选择、反应条件控制和产物提纯方法,揭示这一特种化学品制造中的技术要点与常见问题解决方案。

Main Applications

The primary use of 2-methylpentane is as a solvent in organic synthesis and industrial processes. Its ability to dissolve various organic materials makes it valuable in the production of adhesives, coatings, and rubber products. The chemical's relatively low toxicity compared to some alternative solvents contributes to its popularity in certain applications. In the petroleum industry, 2-methylpentane serves as an important component in gasoline blending. Its branched structure helps improve fuel octane ratings, reducing engine knocking in spark-ignition engines. Additionally, it finds use as a calibration standard in gas chromatography and as a reaction medium in certain polymerization processes.

Safety and Storage

漂白粉 次氯酸钙消毒剂 污水处理漂白杀菌剂赋星赋星(上海)国际贸易有限公司

2-Methylpentane presents significant fire hazards due to its high flammability and low flash point. Proper storage requires explosion-proof equipment and facilities designed for flammable liquids. Containers should be kept tightly sealed in cool, well-ventilated areas away from heat sources and oxidizing agents. Personal protective equipment including chemical-resistant gloves and safety goggles should be used when handling this compound. In case of spills, absorb with inert material and prevent entry into waterways or drainage systems. Adequate ventilation is crucial to prevent the accumulation of flammable vapors, which can form explosive mixtures with air at concentrations between 1.2-7.0% by volume.

商家经验真实案例 · 安全可信
24mmol吡咯对应毫升
本文详细解答24mmol吡咯对应的体积(毫升),包括计算方法、注意事项以及实际应用中的常见问题,帮助读者准确理解化学计量单位转换。

B2B Procurement Guide

When procuring 2-methylpentane for industrial use, buyers should specify required purity levels, which typically range from 95% to 99% depending on application. Technical grade is suitable for most solvent applications, while higher purity grades may be needed for specialized uses. Purchasers should verify supplier compliance with regional chemical regulations (such as REACH in Europe or TSCA in the United States) and request proper safety documentation including SDS. Bulk shipments in isotanks or drums are common, with pricing influenced by crude oil market fluctuations. Consider supplier reliability, logistics capabilities, and ability to provide consistent quality when selecting vendors.

Related Manufacturers