Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

1,4-Cyclohexanedimethanol

Updated: 2026-07-15

Overview

1,4-Cyclohexanedimethanol (CHDM) is a saturated diol compound derived from hydrogenated terephthalic acid derivatives. As a cycloaliphatic building block, it offers unique advantages in polymer chemistry due to its rigid yet flexible molecular structure. Industrially produced since the 1960s, CHDM exists as cis/trans isomers, with the ratio affecting material properties. The chemical serves as a critical monomer for high-performance polyesters, notably polyethylene terephthalate (PETG) and polycyclohexylenedimethylene terephthalate (PCT). Its adoption has grown significantly in packaging and specialty plastics, where it enhances product characteristics without compromising processability.

Physical and Chemical Properties

1,4-环已烷二甲醇 厂家 斯麦克 CAS 105-08-8 可分装小样 定制 现货武汉斯麦克生物科技有限公司

CHDM exhibits excellent thermal stability with a boiling point of 285°C, making it suitable for high-temperature polymer processing. The compound's solubility profile allows versatile formulation options—it dissolves readily in water (70 g/L at 20°C) and most polar organic solvents. The crystalline solid typically shows a melting range rather than a sharp point due to isomer mixtures. Key chemical properties include its diol functionality (two hydroxyl groups) and resistance to UV degradation. The cyclohexane ring structure contributes to enhanced hydrolytic stability compared to linear diols. These characteristics make CHDM-modified polymers resistant to yellowing and maintain mechanical properties under environmental stress.

商家经验真实案例 · 安全可信
洁肤子氨甲环酸精华液抗炎吗
本文解析洁肤子氨甲环酸精华液的抗炎原理与适用场景,从成分作用机制到实际使用建议,帮助科学认识其护肤价值。

Main Applications

Approximately 75% of CHDM production is consumed in polyester resins, particularly for PETG used in medical packaging and consumer goods. The monomer improves clarity, impact strength, and thermoformability in these applications. In coating formulations, CHDM-based polyesters provide exceptional adhesion, flexibility, and chemical resistance for automotive and industrial finishes. The chemical also serves as a precursor for specialty plasticizers and crosslinking agents in adhesives. Emerging applications include 3D printing filaments and optical films, where its optical clarity and dimensional stability are valued. In textile fibers, CHDM incorporation reduces pilling and improves dye uptake.

Safety and Storage

反式-1,4-环已烷二甲醇 3236-48-4 源头工厂 供应武汉卡米克科技有限公司

As a combustible solid, CHDM requires storage away from heat sources and oxidizers. Facilities should maintain temperatures below 40°C to prevent caking and use grounded containers to avoid static discharge. While not classified as acutely toxic, prolonged skin contact may cause irritation—NIOSH-approved gloves and eye protection are recommended during handling. Spills should be contained with inert absorbents and cleaned promptly to prevent slip hazards. The material is not considered hazardous waste under RCRA but should be disposed following local regulations. Proper ventilation (TLV 10 mg/m³) prevents dust accumulation in work areas.

商家经验真实案例 · 安全可信
肉桂醛合成肉桂醇步骤
本文详细解析从肉桂醛还原合成肉桂醇的三种常用方法,包括催化加氢、化学还原和生物转化技术,对比不同工艺的优缺点及适用场景,为实验室和工业生产提供参考。

B2B Procurement Guide

Industrial buyers should specify technical grade (minimum 99% purity) for polymer applications, with particular attention to isomer ratios—typical commercial grades contain 30-70% trans-isomer. Bulk shipments (25kg bags or 1-ton supersacks) offer cost advantages for regular users. Just-in-time procurement is advisable due to limited shelf life (12-24 months in sealed containers). Quality verification should include hydroxyl value (780-820 mg KOH/g) and acid number (<0.1 mg KOH/g) testing. For international shipments, ensure compliance with REACH and TSCA regulations. Established manufacturers include Eastman Chemical, SK Chemicals, and Shandong Blue Sail Chemical.

Related Manufacturers