Overview
1,1,1-Trichloroethane is a synthetic chlorinated solvent first commercialized in the 1950s as a safer alternative to more toxic solvents like carbon tetrachloride. Its rapid evaporation and ability to dissolve oils made it popular for industrial cleaning, though global production has phased down due to its ozone-depleting potential. While still used in niche applications, alternatives like hydrofluorocarbons (HFCs) or aqueous cleaners are increasingly preferred. In B2B contexts, it remains relevant for specific precision-cleaning tasks where residue-free results are critical.
Physical and Chemical Properties
The solvent’s low boiling point (74°C) ensures quick drying, minimizing residue on treated surfaces. Its density (1.34 g/cm³) makes it heavier than water, aiding in separation during waste disposal. Though non-flammable, it decomposes under extreme heat to release toxic gases like hydrogen chloride. Chemically, 1,1,1-trichloroethane is stable under normal conditions but reacts violently with alkali metals. Its slight water solubility (0.44 g/L at 20°C) necessitates careful wastewater management to prevent environmental contamination.
Main Applications
Historically, 1,1,1-trichloroethane dominated metal degreasing for aerospace and automotive components, where its non-corrosive properties protected sensitive alloys. In electronics, it cleaned circuit boards without damaging solder joints. Today, approved uses are limited to essential applications under strict regulations, such as military equipment maintenance or closed-loop systems. Some adhesives and coatings still incorporate it as a thinning agent, though formulators increasingly seek substitutes.
Safety and Storage
Workers handling this solvent should use PPE (gloves, goggles, respirators) to prevent skin contact and inhalation. Storage requires corrosion-resistant containers (e.g., stainless steel or polyethylene-lined drums) to avoid leaks. Due to ozone layer concerns, the Montreal Protocol mandates tracking and reporting of production/imports. Disposal must follow hazardous waste protocols, typically involving incineration with scrubbing to neutralize acidic byproducts.
B2B Procurement Guide
Buyers should confirm suppliers’ compliance with local environmental laws (e.g., EPA regulations in the U.S.). Technical-grade purity (≥95%) is common for industrial use, but specialized applications may require higher grades. Bulk shipments often incur附加 costs for hazardous material handling. Alternatives like modified alcohols or terpene-based cleaners should be evaluated for cost and performance trade-offs.
Related Manufacturers
- 主营：POE、EVA、PA66、1080、PE、ABS、PP、LDPE、HDPE、PC、PA6、POM、PEEK、PVDF、PBT
- 主营：POM、PA66、PC、1080、Pom100p、Pom500p、Pom900p、Pom100t、M90-44、F20-03、ABS747、abs757、TPU、美国杜邦pom、日本旭化成pom、日本宝理pom、ASA、COC、PEEK、PVDF、PCTG、PCTA、PA612、Pa6t、Pa9t
- 主营：POM美国杜邦、POM韩国可隆、Pom100p、Pom500p、Pom900p、M90-44、F20-03、Tpu、Tpv、Pa66、Pctg、PC、Pa6t、100P、500P、K300、PC科思创、PC帝人、PC日本出光、A3WG6、70G30HSLR、杜邦101L、A3X2G5、A3X2G7、2805
- 主营：PVDF、PVDF彩色料、PFA、PC韩国LG1080、FEP、PTFE、PEEK、PEI、PSU、PCTFE、ECTFE、PES
- 主营：1080、工程塑料
- 主营：POM、PA66、POE、PC1080、各种进口工程塑料、工程塑料改性
- 主营：合金塑料
- 主营：PCTG、TPX、LDPE、1080、PA6T
- 主营：弹性体、聚甲醛、聚乙烯、1080、塑胶原、聚丙烯、购物袋、粘合剂、外壳线、聚酰胺12、薄膜包装、塑料袋子、阻隔材料、手提袋料、塑料玩具、聚氯乙烯、光学材料、玻璃纤维、电线电缆、齿轮拉链、汽车配件、薄膜塑料、低压材料、瓶盖材料、运动器材、聚碳酸酯
- 主营：POM、PC、PBT、PC1080、LCP、EVA、HIPS、PA12、PA6、PA66、PET、POE、PMMA、PC/ABS、ABS、HDPE
- 主营：PA、PC、PBT、1080、PP、pc/abs、PC/PBT、PC/PET、POM、LCP、PPS、耐高温、耐化学、耐低温、代替金属、弹性体
- 主营：1080、ABS防火料
- 主营：化学abs、韧性abs、催化剂、PC1080、共聚物、低翘曲、高耐热、电池盒、电池板、太空杯、空针筒、安全帽、玻璃珠、波形板、密封圈、韧性线、tpv原料、自润滑、做齿轮、纤尼龙、拉杆箱、聚酰胺、聚苯醚、增强pa6、口罩料、排水管
- 主营：粘合剂、共聚物、聚酰胺、Lupoy1080、标准尼龙、聚碳酸酯、耐磨尼龙、工程配件、注射成型、玻璃纤维、电线电缆、尼龙塑料、热稳定剂、合金材料、增韧尼龙、基础创新pc、紫外线稳定、热塑性橡胶、液晶聚合物、塑料增韧剂、增强级矿物、四氟乙烯物、热塑弹性体、基础创新塑料、电动工具配件、食品接触应用
- 主营：塑料、PBT PET