Overview
1% Sulfanilamide is a diluted pharmaceutical-grade solution containing 1% (w/v) sulfanilamide, a classic sulfonamide antibacterial compound. Sulfanilamide was one of the first synthetic antibiotics and remains important in both medical and research contexts. The 1% concentration is commonly used for its balance between efficacy and safety in various applications. This solution is typically prepared in sterile water or buffered saline, though other solvents may be used depending on the intended use. It is widely employed in laboratory settings for microbiological studies and as a reference standard in pharmaceutical quality control.
Physical and Chemical Properties
The 1% solution maintains the core chemical properties of sulfanilamide while offering improved handling characteristics. The pure compound is a white crystalline powder, but in solution it forms a clear to slightly yellow liquid. The molecular structure features a sulfonamide group (-SO2NH2) attached to an aniline ring, which is responsible for its antibacterial activity. In solution form, the pH typically ranges between 5.5-7.5 depending on the formulation. The solution is stable at room temperature when properly stored but may degrade with prolonged exposure to light or extreme temperatures. The antimicrobial activity is preserved when stored correctly for up to 2 years.
Main Applications
The primary use of 1% sulfanilamide solution is in pharmaceutical preparations, particularly in topical formulations for minor bacterial infections. It's effective against many Gram-positive and some Gram-negative bacteria. In research laboratories, it serves as a standard antimicrobial agent for susceptibility testing and growth inhibition studies. Additional applications include use in veterinary medicine, particularly for ocular and dermatological treatments. Some industrial applications utilize it as a preservative in certain products where bacterial growth must be controlled. The 1% concentration is particularly favored for its balance between antimicrobial efficacy and reduced risk of adverse reactions.
Safety and Storage
While 1% sulfanilamide is relatively safe at this concentration, proper handling procedures should still be followed. Wear appropriate personal protective equipment including gloves and eye protection when handling. Avoid inhalation of mists or vapors that may form during transfer operations. Storage should be in tightly sealed containers away from direct sunlight. Optimal storage temperature ranges between 15-25°C. The solution should not be frozen as this may cause precipitation or other physical changes. Always check for precipitation or discoloration before use, and discard any solution showing signs of degradation.
B2B Procurement Guide
When procuring 1% sulfanilamide solution, key specifications to verify include: exact concentration (typically 1% w/v but may vary), solvent type (water, saline, etc.), sterility requirements, and any additional stabilizers or buffers present. Pharmaceutical-grade material should be accompanied by appropriate certificates of analysis. For bulk purchases, consider storage capacity and usage rate to ensure the product remains within its shelf life. Lead times may vary depending on the supplier and formulation specifics. Establish quality control protocols to verify each shipment meets specifications, particularly for critical applications like pharmaceutical manufacturing.
Related Manufacturers
- 主营：阻燃剂、催化剂、洗涤剂、磺胺标准溶液、硫酸铵、醋酸镧、起泡剂、清洗剂、碳酸钙、抗氧剂、灭火剂、交联剂、粘合剂、封头剂、丙二醇、酸二氢铝、聚乙烯醇、对氯溴苯、生物试剂、息香乙醚、异戊二醇、香精香料、4-丁二醇、2-氯丙烯腈、2-己基癸酸、二甲胺硼烷
- 主营：染色液、乙氨酸、噻唑兰、喷雾剂、封片剂、清除剂、试剂盒、研试剂、转膜液、dpph试剂、page凝胶、te缓冲液、pbs缓冲液、检测溶液、核酸染料、中性树胶、胰蛋白酶、纤维素酶、染色试剂、mes缓冲液、faa固定液、甲苯胺蓝、生化试剂、实验试剂、ctab抽提液
- 主营：涂料助剂、工业清洗剂、表面活性剂、磺胺标准溶液、合成材料助剂、合成香料、溶剂、香精和香料中间、合成材料中间体、选矿药剂、萃取剂
- 主营：实验试剂、标准溶液、显色试剂盒
- 主营：环氧环己烷、异丙叉丙酮、四甲基氢氧化铵、磺胺标准溶液、双乙烯酮、均苯四甲酸二酐、三聚甲醛、氯甲基三氯硅烷、双季戊四醇、五水合四甲基氢氧化铵、月桂酸钠、二苯甲酮、聚硫橡胶、邻氯溴苯、水杨羟肟酸、甲基纤维素、甲基丙烯酸十八酯、氨基磺酸、硫氢化钠、甲基磺酸、吐温、司盘、芥酸pko、pko-e